Loctite Questions

Reply Subscribe

Thread Tools

Search this Thread

11-06-2007 | 07:27 AM

aaronbetzner

Thread Starter

On The Tree

iTrader: (2)

Joined: Dec 2005

Posts: 137

Likes: 0

From: Xenia ohio

Loctite Questions

I red loctited and torqued the flywheel but didn't use loctite on the pressure plate or slave. Am I going to have problems? If so I'll pull that sob back off.
THanks for your help.

Reply Like

11-06-2007 | 07:36 AM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

If the bolts back out you will have problems.You should have used loctite.

Reply Like

11-06-2007 | 07:46 AM

aaronbetzner

Thread Starter

On The Tree

iTrader: (2)

Joined: Dec 2005

Posts: 137

Likes: 0

From: Xenia ohio

Maybe that should be in the sticky then. Has anyone else done this?

Reply Like

11-06-2007 | 07:59 AM

Black02SLPSS

TECH Fanatic

iTrader: (5)

Joined: Nov 2006

Posts: 1,484

Likes: 1

From: Owasso, Ok

I would think if they pressure plate bolts were properly torqued then they should not back out. But thats just me.

Reply Like

11-06-2007 | 08:49 AM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

Your right they shouldnt, but it has happened before.

Reply Like

11-12-2007 | 10:13 PM

1BADAIR

10 Second Club

iTrader: (1)

Joined: Jan 2003

Posts: 1,902

Likes: 1

From: oxford, Michigan

I won't put a PP on without red-preminant loctite. Had to fix to many that came loose and where torqued to spec

Reply Like

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last