time for tranny/clutch work..need help!!!
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: North Dallas DFW
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
time for tranny/clutch work..need help!!!
My slave and master are getting replaced here in a few days and while im down there i will be replacing the clutch, resurfacing/getting new flywheel and a few other things like the rear main seal.
However, i would like to stick with a ls6 or ls7 clutch for drivablilty and the fact its oem parts.
Do you have to get an ls2 flywheel to switch to either of these clutches?
also, any other suggestions for a good streetable, slightly better than stock clutch settup? any input would help.
thanks guys!
However, i would like to stick with a ls6 or ls7 clutch for drivablilty and the fact its oem parts.
Do you have to get an ls2 flywheel to switch to either of these clutches?
also, any other suggestions for a good streetable, slightly better than stock clutch settup? any input would help.
thanks guys!