Six Speeds Inc.
Thread Starter
Teching In
Joined: Dec 2007
Posts: 13
Likes: 0
From: tn
Six Speeds Inc. Hey guys, I justed signed up here & am looking for some advice/info on transmissions. I have an 03 Cobra & the tranny has been giving me fits lately. I had it fixed twice already & now I'm tired of dealing wiith it. I wanna ditch the clunky stocker & go ahead with a built tranny.
I was looking around & someone mentioned Six Speeds Inc. but I couldn't find much info on the Stang forums. I've heard some good things about RPM but it looks like SSI offers a very similar set up for much less $$$.
I assume I'd need the 4+ setup. Right now I'm at about 620rwhp. My current tranny has the Lethal TOB sleeve and a 26 spline input shaft. This is a weekend car with moderate track duty.
I'm just looking for some feedback from anyone with any experience with this setup. How does it shift? Durability? Noise? Am I correct that it's $2250 & I keep my current tranny? Right now I'm leaning this way just from browsing here, but I wanna make sure. I want this to be my last tranny R&R.
Thanks!
I was looking around & someone mentioned Six Speeds Inc. but I couldn't find much info on the Stang forums. I've heard some good things about RPM but it looks like SSI offers a very similar set up for much less $$$.
I assume I'd need the 4+ setup. Right now I'm at about 620rwhp. My current tranny has the Lethal TOB sleeve and a 26 spline input shaft. This is a weekend car with moderate track duty.
I'm just looking for some feedback from anyone with any experience with this setup. How does it shift? Durability? Noise? Am I correct that it's $2250 & I keep my current tranny? Right now I'm leaning this way just from browsing here, but I wanna make sure. I want this to be my last tranny R&R.
Thanks!
Thread Starter
Teching In
Joined: Dec 2007
Posts: 13
Likes: 0
From: tn
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Teching In
Joined: Dec 2007
Posts: 13
Likes: 0
From: tn
I didn't call them since I'm not ready to buy right this minute. I'll just call them when I'm ready to take the plunge.
Yeah, that's why I came here. I couldn't find anybody who had one on the Mustang forums so I figured this would be the best place for info since they're a vendor here & more people would have them.
I didn't call them since I'm not ready to buy right this minute. I'll just call them when I'm ready to take the plunge.
I didn't call them since I'm not ready to buy right this minute. I'll just call them when I'm ready to take the plunge.
They are the best from what I have seen over many years of fallowing this stuff. I have had a lot of Corvette owning friends get RPM transmissions, the Automatics seem to be alright, but manual guys never seem to be happy.
Joe and Amber are the way to go.
Amber will take care of ya Six Speeds Inc is the best in the business, we use them for our customer cars and they take a BEATING and keep going, and i will be getting one done for my personal car very shortly
No need to wait till you are ready to take the plunge. Call Amber on Monday, she is very helpfull and will get you squared away. Then when you are ready, you'll know what you need and you can call them and say "go". Guess how I know this??? I can't wait for my 4+ to get here in the spring...
Shut the **** up.
There are plenty of '03/'04 Cobra owners here. Along with plenty of other high horsepower NON LSX owners on LS1tech.
SSI just happends to be a sponsor here. So it looks like he's stumbled upon the perfect place to learn some info on these guys.
They've done TONS of rebuilds for a lot of guys on tech, with very high praise.
Lloyd, looks like you've got the number to call. You can do a search here and find lots of info on them. I wouldn't hesitate to go ahead and pull the trigger when ready.
There are plenty of '03/'04 Cobra owners here. Along with plenty of other high horsepower NON LSX owners on LS1tech.
SSI just happends to be a sponsor here. So it looks like he's stumbled upon the perfect place to learn some info on these guys.
They've done TONS of rebuilds for a lot of guys on tech, with very high praise.
Lloyd, looks like you've got the number to call. You can do a search here and find lots of info on them. I wouldn't hesitate to go ahead and pull the trigger when ready.
Thread Starter
Teching In
Joined: Dec 2007
Posts: 13
Likes: 0
From: tn
Cool, thanks guys. Only reason I say I'll wait to call is that I'm afraid I'll just be like "To hell with it, I'll go ahead & order it now."
I kinda told the wifey I'd wait till the first of the year. But you know what they say, it's easier to ask for forgiveness than ask for permission.
I kinda told the wifey I'd wait till the first of the year. But you know what they say, it's easier to ask for forgiveness than ask for permission.
Banned
Joined: Oct 2007
Posts: 158
Likes: 0
I've also heard good things about them.
My credo is the ask forgiveness rather than permission. LOL Welsome to LS1Tech and the Ford haters should STFU and welcome a fellow gearhead rather than bash him. Not saying I don't indulge in some friendly smack talking once in a while.
My credo is the ask forgiveness rather than permission. LOL Welsome to LS1Tech and the Ford haters should STFU and welcome a fellow gearhead rather than bash him. Not saying I don't indulge in some friendly smack talking once in a while.
Cool, thanks guys. Only reason I say I'll wait to call is that I'm afraid I'll just be like "To hell with it, I'll go ahead & order it now."
I kinda told the wifey I'd wait till the first of the year. But you know what they say, it's easier to ask for forgiveness than ask for permission.
I kinda told the wifey I'd wait till the first of the year. But you know what they say, it's easier to ask for forgiveness than ask for permission.
BTW, welcome to Tech...
Thats a statement I'd expect from a very ignorant person, I am glad you came through. 
A T-56 is a T-56 which the SVT 03/04 Cobra came with.
SixSpeedInc will do you right Lloyd.
Please ignore some people obviously they are under heavy E-thug training.
A T-56 is a T-56 which the SVT 03/04 Cobra came with.
SixSpeedInc will do you right Lloyd.
Please ignore some people obviously they are under heavy E-thug training.
Thread Starter
Teching In
Joined: Dec 2007
Posts: 13
Likes: 0
From: tn
Well I ordered my new tranny yesterday. You guys were right, Amber is great to deal with. She answered all my questions & then some. Very pleased so far, I can see why they have so many loyal customers here.
Looking forward to getting it installed & getting back on the street. Gotta keep all these LSX's in check.
Looking forward to getting it installed & getting back on the street. Gotta keep all these LSX's in check.
I've also heard good things about them.
My credo is the ask forgiveness rather than permission. LOL Welsome to LS1Tech and the Ford haters should STFU and welcome a fellow gearhead rather than bash him. Not saying I don't indulge in some friendly smack talking once in a while.
My credo is the ask forgiveness rather than permission. LOL Welsome to LS1Tech and the Ford haters should STFU and welcome a fellow gearhead rather than bash him. Not saying I don't indulge in some friendly smack talking once in a while.
Jason