TO bearing/ Slave failure pics
#1
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Sep 2004
Location: Cincy, Oh.
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I searched on here I came across a lot of threads where M6 owners were having issues and were unsure if it was the throw out bearing, slave, or just a hydraulic problem. So here is my story...
At the end of last season I was running T&T one Friday night. On my 3rd pass I noticed a strange feeling in the clutch and had a hard time shifting into 4th. As I pulled away with my time slip the clutch had started to engage about 1" from the floor and I hear this awful squeal coming from under the car. I'm waiting for my friend to show up with a trailer and I can actually watch what's left of my clutch fluid running out of the hole in the bell housing. Pulled the tranny the next day and this is what I saw....
![](http://pic40.picturetrail.com/VOL367/977291/14510013/285503965.jpg)
![](http://pic40.picturetrail.com/VOL367/977291/14510013/285503973.jpg)
At the end of last season I was running T&T one Friday night. On my 3rd pass I noticed a strange feeling in the clutch and had a hard time shifting into 4th. As I pulled away with my time slip the clutch had started to engage about 1" from the floor and I hear this awful squeal coming from under the car. I'm waiting for my friend to show up with a trailer and I can actually watch what's left of my clutch fluid running out of the hole in the bell housing. Pulled the tranny the next day and this is what I saw....
![](http://pic40.picturetrail.com/VOL367/977291/14510013/285503965.jpg)
![](http://pic40.picturetrail.com/VOL367/977291/14510013/285503973.jpg)
![](http://pic40.picturetrail.com/VOL367/977291/14510013/285503971.jpg)