playtoy

iTrader: (5)

Guys I am finishing up the swap from A4 to M6 and was wondering what some of you guys have done with the A4 harness under the car. Did you cut it or did you just tuck it up out of the way somewhere?

jmm98LS1

iTrader: (28)

I just zip tied the A4 and rear o2 sensor harness to the crossmember.

bjamick

iTrader: (31)

I plan on doing this soon .. Hopefully the wiring isn't to difficult..

Was setting up the master cylinder pretty difficult?

playtoy

iTrader: (5)

I haven't had any trouble doing any of the swap. Of course I haven't been pressed for time since it is not my DD.

camaroguy26

iTrader: (21)

The swap took me about 24 hours total I'm guessing. I am pretty mechanically inclined but don't have a **** ton of experience, and did the whole thing myself besides my dad's help to lift the tranny in. But I cut the connector off the A4 harness, taped it all up good and zip tied it out of the way.