Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

pilot bearing? throwout bearing?

Thread Tools
 
Search this Thread
 
Old 03-31-2008, 09:57 PM
  #1  
TECH Junkie
Thread Starter
iTrader: (4)
 
Soul TKR's Avatar
 
Join Date: Jun 2004
Location: San Diego, CA
Posts: 3,543
Likes: 0
Received 1 Like on 1 Post

Default pilot bearing? throwout bearing?

what's the difference? are they the same thing?

seems like my pilot bronze bushing worked better than the needle bearings...
Old 03-31-2008, 10:05 PM
  #2  
11 Second Club
iTrader: (33)
 
chuckyt1's Avatar
 
Join Date: Apr 2006
Location: Chicago Area
Posts: 1,008
Likes: 0
Received 0 Likes on 0 Posts

Default

Pilot bearing is in the flywheel and the input shaft slides into it. The throwout bearing presses on the pressure plate and releases the clutch.
Old 03-31-2008, 10:13 PM
  #3  
TECH Junkie
Thread Starter
iTrader: (4)
 
Soul TKR's Avatar
 
Join Date: Jun 2004
Location: San Diego, CA
Posts: 3,543
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by chuckyt1
Pilot bearing is in the flywheel and the input shaft slides into it. The throwout bearing presses on the pressure plate and releases the clutch.
both are pretty cheap correct?
Old 03-31-2008, 10:14 PM
  #4  
TECH Junkie
Thread Starter
iTrader: (4)
 
Soul TKR's Avatar
 
Join Date: Jun 2004
Location: San Diego, CA
Posts: 3,543
Likes: 0
Received 1 Like on 1 Post

Default

would either of them cause a sqeal or humming noise?
Old 03-31-2008, 11:21 PM
  #5  
11 Second Club
iTrader: (33)
 
chuckyt1's Avatar
 
Join Date: Apr 2006
Location: Chicago Area
Posts: 1,008
Likes: 0
Received 0 Likes on 0 Posts

Default

Pilot bearing is about 25 from a dealer. The slave is in the 100ish range and comes with a throw out bearing on it. Depends on when the noise occurs. Most often the noise comes from the throw out...
Old 03-31-2008, 11:44 PM
  #6  
On The Tree
 
iverson387's Avatar
 
Join Date: Apr 2006
Location: LI, NY
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

Does The Noise You Have Go Away When You Step On The Clutch. This Is Common With The Throwout Bearing Noise.



Quick Reply: pilot bearing? throwout bearing?



All times are GMT -5. The time now is 11:57 PM.