Any of the Sponsors Rebuild Ford Trannys?
04-26-2008 | 12:54 AM
#2
If they can get parts for a T56, they should be able to get parts for a T45. I normally just do T56s but I would take on a T45 job in a heartbeat.
If your buddy can do it, have him just look into a T56; better trans by far.
If your buddy can do it, have him just look into a T56; better trans by far.
04-27-2008 | 10:58 AM
#4
The T45 shares several parts from the T56 . Any good standard transmission shop should be able to take on the unit although I would personally suggest upgrading to a TKO600 or maybe a T3650 .
