clutch install problems

Reply Subscribe

Thread Tools

Search this Thread

Aug 2, 2008 | 05:58 PM

makxc50099

Thread Starter

Staging Lane

Joined: May 2006

Posts: 58

Likes: 0

clutch install problems

i am in the process of installing the ls7 clutch kit in my car nad when i went to bleed it the pedal will puch down and jsut stay down untill i i pull it up with my hand. what did i do worng?

thanks

matt

Aug 2, 2008 | 07:09 PM

makxc50099

Thread Starter

Staging Lane

Joined: May 2006

Posts: 58

Likes: 0

i got the pedal to come up and it seems pretty good now. but the car wont go into gear when it is on

Aug 2, 2008 | 08:14 PM

makxc50099

Thread Starter

Staging Lane

Joined: May 2006

Posts: 58

Likes: 0

any one

Aug 3, 2008 | 09:23 AM

RHDV8

Staging Lane

Joined: Oct 2006

Posts: 62

Likes: 0

Sounds like there is still some air in there.

Aug 5, 2008 | 05:31 PM

CuNfUzEd

TECH Regular

iTrader: (14)

Joined: Oct 2005

Posts: 461

Likes: 0

From: Oklahoma

I would recomend a mighy vac. Buy one from Auto Zone or some other such place. You have air in your system still. Also be aware that you can get good pressure out of your system and still have air in there. When that happens say bye bye to the slave cylinder after driving for a while. Happened to me. Put the mighty vac on and let it set for a while. Pump the hell out of your clutch and repeat process. Good luck.

Aug 12, 2008 | 09:13 AM

makxc50099

Thread Starter

Staging Lane

Joined: May 2006

Posts: 58

Likes: 0

bad slave from the mity vac

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last