please help me
Thread Starter
Registered User
Joined: Aug 2008
Posts: 8
Likes: 0
please help me Ok I put a new clutch slave and master cylinder in my 99 ss all was fine then my clutch hit the floor and there a puddle of fluid on the garage floor.
What is happening is that the hydraulic line going into the slave disconects anytime i press the clutch. ( not all the way off but just enough to lose all pressure and clutch use.)
I replaced the retainer inside the slave but it still does the same thing.
How can I fix It???
Wha am I doing wrong?
please help.
What is happening is that the hydraulic line going into the slave disconects anytime i press the clutch. ( not all the way off but just enough to lose all pressure and clutch use.)
I replaced the retainer inside the slave but it still does the same thing.
How can I fix It???
Wha am I doing wrong?
please help.
