gopherit98

iTrader: (7)

what exactly is the difference between these will lt work on my ls i really wanna swap and it pisses me off seeing people sell swaps for 1100 1000 because i never can run across this i want a m6 so bad but i'm slowly giving up on finding a good priced one

MEAN LT1

iTrader: (2)

I really dont feel likegoing over the differences but to save you time and money just keeop looking for a LSX style t56. In the end it will cost you less money.

taner

iTrader: (6)

you need a front cover and input shaft. everything else is the same.

gopherit98

iTrader: (7)

thanks

thesource

iTrader: (60)

As long as you find a LT1 unit with the same gear ratio as the LS1 unit . Some of the early ones were different .

hawk584

iTrader: (1)

when i ran by '95 hawk against an old buddies '00 hawk, for some reason at high RPM's his trany wouldn't shift in to 2nd as easily as mine

zjt

iTrader: (1)

for gear ratios over the years check out http://en.wikipedia.org/wiki/Tremec_T-56_transmission

All F-body m6 have the same ratio except 93s

thesource

iTrader: (60)

Thanks for the link but I am more than aware of what T56's came in what . Some of th e 94's had the bastard ratio as well . I just let the above user know that there was a different one floating around out there .