Description:

For sale.
NEW 430" drag race engine, balanced and blueprinted with build sheet. 14 dyno pulls, never been in car.
-ERL Gen IV 6.0L block - bushed lifter bores, billet steel, doweled main caps, Darton sleeves, 4.140" bore - $3700
-Frankenstein F710S heads, Titanium intake valves, Inconel exhaust valves, PAC 1228 solid roller springs, - $6000 
-Callies 8wt CCW Compstar 4340 crank - $1100
-Callies Compstar 6.125" H-Beam rods, ARP 2000 bolts - $650
-Wiseco custom 6cc gas ported dome piston with pockets designed for F710 heads, .200" wall pins, GFX rings - 13.5:1 - $1100 
-ARP head studs - $300
-ARP main studs - $250
-Cam Motion mid-lash solid roller 275/289 @ .050 .841:/.841" 113lsa 111icl 
-Jesel pro series 1.7/1.7 shaft rockers - $1800
-Comp Cams .165" wall dual taper 7/16" push rods - $350
-Morel Pro Series tie bar roller lifters - $750
-CID 4.5 lightened EFI intake with 4500 top - $1400
-NEW RCE/BLP billet 1050 gas Dominator - $1500
-Moroso aluminum F-Body oil pan - $550
-Aviad external wet sump oil pump kit and drive - $1500
-JP Motion billet double roller timing chain - $130
-LS3 front cover - $90
-Powdercoated valley cover w/ oil fill and -12 AN welded in for vacuum or breather - $100
-Frankenstein powdercoated valve covers specific to F- Series heads w/ coil mounts
-ATI truck balancer - $400

-All NEW, recently assembled and dyno tuned, never been in car.
23,000 carb to pan, ready to go, completed in Nov. 2021
https://www.dropbox.com/s/wljujgje9s...12621.MOV?dl=0

Selling for under parts cost, no labor or dyno cost included. Can crate and ship.

Put a N20 kit on it and have some real fun!
Vacuum and water pump not included.

Serious only, contact
314-four-five-two-66-three-nine
call, text or PM