Description:

For Sale: Turbo Kit off my 4th Gen Trans Am. This was originally built in the Winter of 2017 / Spring of 2018 and updated a couple of times since then. I have pushed over 1700 rear wheel hp through this kit with the air filters on! This would be compatible based on a car with a Rock Solid Motorsports front end kit. As with anything, slight modifications may be needed to fit. Clears a standup radiator.

Kit will include the following components:
- Truck Manifolds, coated by Race Coatings, drilled and tapped for individual cylinder EGTs and backpressure sensors, 2.5” stainless V-bands
- Precision Turbos (Purchased 11/2017, retail from Precision is $2719.99/each or over $5400 total). Have original boxes and packaging.
- Precision Turbo PW46 Wastegates (Purchased 11/2017, retail from Precision is $389.99/each or just under $800 total). Have original boxes and all springs.
- All stainless hotside piping and V-bands. Includes dual 3.5” stainless downpipes. Each downpipe has O2 bung.
- Custom Air to Air Intercooler with stacked Garrett Cores, #703518-6005, 24”W x 12”H x 6”D combined. Each core can be found for about $300/each but usually $550/each.
- Dual Chinese 50mm Blow Off Valves
- All cold side aluminum piping, including Alphaloc connectors (7 connectors costing over $100-130/each totaling over $700-910). Bungs for pre-intercooler Psi, pre-intercooler temperature and Intake Air Temperature. 3” off each turbo merged to 3.5” through both sides of the Intercooler to the Throttle body.
- R2C Black Hex Air Filters
- Turbo Drain Lines and Turbo Feed Lines

There is over $7500 in large parts into this, probably $2500 in aluminum, stainless, V-bands, flanges, etc and a few thousand of labor to build. Would be $12-13k to replicate this kit new or more depending on labor.

Would be willing to sell the Throttle body that has one of the Alphaloc flanges welded to it.

Price: $7250

Would consider selling without the turbos if requested. V-banded housings needed for installation of other turbos.