WTB - ARP Main studs for GEN 3 and pistons
WantedEngine - Internals
02-12-2022, 05:59 PM | Replies: 13 | Views: 893
-
Price
Any Price
- Location Howell, MI, 48855, USA
- Condition New
Description:
Looking for a set of main studs for a 2002 LQ4.
Also need a set of 4.065 or 4.070 pistons for 6.125 rods and 4" crank. Need to be 8 to 12cc dish for the comp ratio I need.
PM what you have
02-12-2022, 06:46 PM
#2
<spam/scam post removed>
Sounds sketchy. 2 posts, asking to contact by gmail account. Everyone just be careful.
Sounds sketchy. 2 posts, asking to contact by gmail account. Everyone just be careful.
Last edited by wssix99; 02-14-2022 at 08:24 AM. Reason: <spam/scam post removed>
02-13-2022, 01:02 AM
#4
I have a set of new in the box Wiseco K445X7 Pistons and rings that have a little more dish at -15 that I may sell since I just bought a complete assembled 416 shortblock with the same pistons in it. You can run the Felpro MLS .041 head gaskets to make up -2 ccs compared to the .051 LS9 gaskets.
Last edited by ondatrack; 02-13-2022 at 01:08 AM.
02-13-2022, 07:28 AM
#6
I have a set of new in the box Wiseco K445X7 Pistons and rings that have a little more dish at -15 that I may sell since I just bought a complete assembled 416 shortblock with the same pistons in it. You can run the Felpro MLS .041 head gaskets to make up -2 ccs compared to the .051 LS9 gaskets.
Trending Topics
02-18-2022, 01:42 PM
#13
I will add the last set I used was checked by the machine shop for a line home and it was not needed. So definitely check. But find a machine shop that won’t just charge you no matter wat and line bore your block lol