When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
*October 17th, the shell has been scrapped, if you're interested in any of the hard parts left I will be making a separate thread*
Open to offers on any of the interior or body pieces, just let me know what you're interested in. If there is no interest in the tub or any of the interior it will be loaded on the trailer and taken off for scrap.
Make offers, I'll try to get prices on things and update the list as things go. Willing to ship at buyers expense, Cash, venmo, paypal, zelle, all accepted, if paying G&S I ask you cover the fees. All prices OBO
S60 narrowed 3" per side strange, with 3.54 gears, strac, 1/2 studs with LT1 drilled & slotted rear brakes, painted black with POR15 - $2750
BMR MTCA002 on car adjustable Rear LCA's black hammertone - $200
Spohn #405 short torque arm, mild steel, with drive shaft loop, straight mount, trimmed for S60, also have long tube/y pipe front mount that is dipped for clearance, no DS loop - $400
Chromoly TH350/Glide trans mount - Sold
BMR KM349 tubular K member for manual rack, hammertone, both LS and SBC/BBC engine stands included, - Sold
Stock LS car rear springs with heater hose mod - $20
Midwest Chassis manual master cylinder bracket only - $50
SSR spike 17 x 4.5 1.75" BS w/ 26x6.00R17 M/T Sportsman S/R 50 miles of road driving - Sold
SSR spike 15x10 4.50" BS, P295/55R15 ET streets with 0 passes on them, 50 miles of road driving - $700
Wild Ride Chassis 6 point steel roll bar, I also have the kicker bars to make it an 8 point *will need to cut from or buy the whole tub
One kirky and f body seat brackets.
Dash and console were swapped from a firebird,
Gauge panel has been modified for mounting a Holley 7" dash - $25
Manual Front seats, no rips or tears
97 Firebird dash and console, no air bag - $150
No rust on or under the car, clean and clear Virginia title in my name. Car is located in the Northern VA area either at my work or home 20151 or 201877 zip codes.
Last edited by biketopia; 10-17-2023 at 12:32 PM.
Reply
Bump! Motor, trans and ECU have been removed. Roller is ready to head to it's new home. Confirmed rear has 35 spline Strac, 1/2" screw in studs 1350 yoke, 3.54 gear. Roller will also come with SLP loud mouth exhaust that has been converted to single exit, Hooker LT1 headers (drivers side is 2 piece to aid in install)
How did you get that screen to fit where the speedometer goes? Is it the 5 or the 6.6 inch screen?
Also what is the quick release hub on the wheel? interested in that.
I'll get some better pictures this afternoon. I removed the stock cluster and used just the factory trim piece. Cut a piece of sheet metal out to the opening and fastened it with tabs & rivets then mounted the screen to it. That is a 7", but I did the same with analog gauges too. The Quick release is either a Strange or Strange knock off by Jegs. 99% sure it has the SFI approved number on it, it's specific for a grant 5 bolt wheel I believe.
I'll get some better pictures this afternoon. I removed the stock cluster and used just the factory trim piece. Cut a piece of sheet metal out to the opening and fastened it with tabs & rivets then mounted the screen to it. That is a 7", but I did the same with analog gauges too. The Quick release is either a Strange or Strange knock off by Jegs. 99% sure it has the SFI approved number on it, it's specific for a grant 5 bolt wheel I believe.
Is it a weld on hub and is it a button push to remove the steering wheel?
It is not welded on, it's internally splined to a GM column. I think I have a weld on piece too, or they're readily available from jegs. It's a rear collar release. The wheel is a grant gt 3 hole not 5 The afternoon slipped away from me. I'll get some better pics of the dash tomorrow. You interested in the dash or wheel?
Steering wheel, front fenders, front bumper, front control arms, front coil overs, shifter, master and line lock sold. List updated. Most items are off the car now, I will work on getting updated pictures this week.
Friday Bump! All parts are removed from the car & updated the list again. If there's anything you're interested in that might not be listed feel free to reach out!