Balanced K1/Wiseco stroker kit
For SaleEngine - Internals
Feb 9, 2024, 01:33 PM | Replies: 9 | Views: 1589
-
Price
$1,600
- Location Clarksville, TN, 37043, USA
- Condition Used
Description:
Still in the motor coming out this week!
In a running motor - not new but has about 1400 miles on it.
The assembly is balanced so not parting out yet. Will use crank and sell rods/pistons later if does not sell as a kit.
You are welcome to the bearings too, King XP rod and main.
K1 Crank - Part #012FAE40024 - 4.00" stroke 24X
Wiseco 3.903 bore pistons - Part #K445X3903 - 15cc dish
K1 Forged H Beam Rods - Part #012AE25613 - 6.125 with ARP2000 bolts
I can't afford to ship this crank so local pickup only - have you seen UPS prices lately?
$1600 Cash picked up... will be at LS Fest if you want to meet there.
Last edited by JimTA; Aug 28, 2024 at 01:47 PM.
Reply
Still in the motor coming out this week!
In a running motor - not new but has about 1400 miles on it.
The assembly is balanced so not parting out yet. Will use crank and sell rods/pistons later if does not sell as a kit.
You are welcome to the bearings too, King XP rod and main.
K1 Crank - Part #012FAE40024 - 4.00" stroke 24X
Wiseco 3.903 bore pistons - Part #K445X3903 - 15cc dish
K1 Forged H Beam Rods - Part #012AE25613 - 6.125 with ARP2000 bolts
I can't afford to ship this crank so local pickup only - have you seen UPS prices lately?
$1600 Cash picked up... will be at LS Fest if you want to meet there.
In a running motor - not new but has about 1400 miles on it.
The assembly is balanced so not parting out yet. Will use crank and sell rods/pistons later if does not sell as a kit.
You are welcome to the bearings too, King XP rod and main.
K1 Crank - Part #012FAE40024 - 4.00" stroke 24X
Wiseco 3.903 bore pistons - Part #K445X3903 - 15cc dish
K1 Forged H Beam Rods - Part #012AE25613 - 6.125 with ARP2000 bolts
I can't afford to ship this crank so local pickup only - have you seen UPS prices lately?
$1600 Cash picked up... will be at LS Fest if you want to meet there.
Thread Starter
Joined: Jan 2017
Posts: 553
Likes: 67
From: Clarksville, Tn
I bet shipping is double that…depending on where and how.
Im wrapping up a complete build right now in the shop, and getting heads, rotating assembly, and a few other small items from Cali to Ga was $1k shipping. It’s outrageous!
Im wrapping up a complete build right now in the shop, and getting heads, rotating assembly, and a few other small items from Cali to Ga was $1k shipping. It’s outrageous!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
Joined: Jan 2017
Posts: 553
Likes: 67
From: Clarksville, Tn