Description:

Before I part this out I'm offering this as a complete package with everything listed below. Car is together and running and can provide video if wanted. I had it out last Saturday in 90* heat and went 8.95 & 8.84 @ 154. Engine has approximately 45 passes on it, transmission was gone through 15 passes ago, turbo and kit has about 150 passes on it.

2009 6.0 Block, rods, pistons and crank 58x with new rings & bearings. Cylinders were honed so still stock bore.
Dart LS1 heads with inconel exhaust valves, adjustable rockers (10.2:1 ish compression)
ARP head and main studs
Moroso steel oil pan and windage tray
ATI Balancer
LSA oil pump
LS9 head gaskets
LS2 front cover
Katech timing chain
Flowtech induction custom cam

Powerglide with JW transmission SFI case
300m TCI input shaft
1.80 first gear
Deep sump cast aluminum pan
Reverse pattern transbrake valve body
FTI converter
Trans cooler

Turbo kit
Truck manifolds ceramic coated
SS 2.25" merge pipe tig welded and back purged
Tial 38mm wastegates
RPS blow off valve
Precision PT88 T4 .96 AR with ceramic coated exhaust housing
Aluminum charge pipe with provision for IAT sensor, nitrous nozzle
Fast 90mm throttle body with wiggans style clamp between charge pipe and TB.
Edelbrock pro flo XT intake and rails
Deatchwerks 2200 cc injectors
Downpipe with 2 different configurations, there is a V band in fender and one aluminum pipe for bumper exit exhaust, second is stainless steel with a muffler that exits past the firewall to be true street legal.

Misc
F-Body radiator and fans with Joes racing radiator mount to lay down the radiator. Will need a 1.25" tube welded in place of lower radiator support.
Breather tank with lines
Holley meth kit with 2 nozzles
Mechman 240 amp alternator and billet alternator mount
Fbody water pump
Manual belt tensioner
Truck coils
Oil cooler and lines