PJLS2

Hi there, I'm new to the forum, I have been getting info for my build from here and never actually ask anything but I'm about to get my block from the machine shop and start putting stuff together, but I really can't decide with what bearings should I go since I'm going to be using my motor as a daily driver.. I have a LQ4 and pretty much I'm building it to the LS2 specs with a little more performance such as port heads, aftermarket intake manifold and a more aggressive cam, but the bearings are eating me alive and I can't decide with which one I should go, race or just stock replacement.. If you guys can steer me in the right direction I really appreciate.. It will not see racing or anything like it maybe a pass to just see what it do, but other than that it will see no track since it is for my daily driver S10 pick up truck.. Thanks.

2000SS1979

iTrader: (16)

Sounds like stock is more than fine for this set-up to me.

PJLS2

That's what I thought, but since the point is having a hi performance kind of deal or an upgrade per say, I thought otherwise...