2001 z28 fs in MI
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Feb 2004
Location: Clinton Twp, MI
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It sucks that I'm doing this but I have to sell my Camaro. It's not that I can't afford it, it's just that I can't afford to do much else while owning it. I hardly ever have any extra cash. And the money I do round up ends up going into this car. I love driving this car but it cost's me over $1k plus gas every two months. Plus the money I've put into it. So I'm looking to sell it to buy something I can better afford.
It's a Black 2001 Z28 A4 with t-tops 46k miles, it's got everything but leather.
I always take care of it and wash it about once a week. It's hardly dirty. It gets 91 or higher octane every fillup and I always changed the oil with Mobil 1 Tri Syn.
It's also got a bunch of go fast goodies on it.
KBDD sfc
UMI non adj pan bar
UMI tubular lca's
Poly rear sway bar bushings and endlinks
Eibach 32mm front swaybar
Poly front sway bar bushings and endlinks
BMR front stb
SLP lid
FTRA
Holly Power Shot filter
AMW Catch Can
TB bypass
Magnaflow catback
Mccord power plate
Ultimate fan mod
17"x9" Black powder coated Eagle 077 wheels
245 Bridgestone Potenzas in front
275 BFGoodrich TA KDWS - Brand New, less than 500 miles
New brakes and rotors all around about 5k ago
Diamond clear corners all around
New drivers side window motor
B&M supper trans cooler
Also have a set of Mac Mid's that need to be coated that I will include
Also have the stock lca, pbar, front sway bar, stock lid that you can have if you want.
Now for the bad
The rear bumper has a scrape from a very low speed (less than 3mph) bump with a brick wall.
The pass side rocker panel has a small dent from road debris. It's not visible but if you look under the car and feel with your hand you can find it.
The car runs and drives great. Never a problem besides the window motor. I've only been to the track twice. It ran a 13.406 @106.33 last time I took it to the track. I'll really miss it and plan to get another when money is more plentiful and I can make it a sunday driver instead of a daily.
$13,500 obo
It's a Black 2001 Z28 A4 with t-tops 46k miles, it's got everything but leather.
I always take care of it and wash it about once a week. It's hardly dirty. It gets 91 or higher octane every fillup and I always changed the oil with Mobil 1 Tri Syn.
It's also got a bunch of go fast goodies on it.
KBDD sfc
UMI non adj pan bar
UMI tubular lca's
Poly rear sway bar bushings and endlinks
Eibach 32mm front swaybar
Poly front sway bar bushings and endlinks
BMR front stb
SLP lid
FTRA
Holly Power Shot filter
AMW Catch Can
TB bypass
Magnaflow catback
Mccord power plate
Ultimate fan mod
17"x9" Black powder coated Eagle 077 wheels
245 Bridgestone Potenzas in front
275 BFGoodrich TA KDWS - Brand New, less than 500 miles
New brakes and rotors all around about 5k ago
Diamond clear corners all around
New drivers side window motor
B&M supper trans cooler
Also have a set of Mac Mid's that need to be coated that I will include
Also have the stock lca, pbar, front sway bar, stock lid that you can have if you want.
Now for the bad
The rear bumper has a scrape from a very low speed (less than 3mph) bump with a brick wall.
The pass side rocker panel has a small dent from road debris. It's not visible but if you look under the car and feel with your hand you can find it.
The car runs and drives great. Never a problem besides the window motor. I've only been to the track twice. It ran a 13.406 @106.33 last time I took it to the track. I'll really miss it and plan to get another when money is more plentiful and I can make it a sunday driver instead of a daily.
$13,500 obo
![](http://mywebpages.comcast.net/jm8881/dd.jpg)
Last edited by jm8881; 11-24-2004 at 12:40 PM. Reason: updated