Selling out my roller Notch project.........link inside.
08-07-2006 | 09:16 PM
#1
Thread Starter
9 Second Club
iTrader: (119)
Joined: Aug 2003
Posts: 2,972
Likes: 1
From: CISSNA PARK, IL
Selling out my roller Notch project.........link inside. hey guys..... Bottom Dollar New Price-$3500. FIRM!!! $5500 for EVERYTHING!!! FIRM
i'm selling out my big dreams of huge HP. i've got a deposit down on a complete running/driving street car from texas i will be buying here in under 2 weeks. i would like to have this car gone, so i'm posting here as well as a couple other places like chitown & corral. anyway, let me know if you're interested. further down the page i've posted a link. you'll see i have some high quality components i've gathered that i can make a bit of a better deal on to whomever buys the chassis. if you see anything you're interested in parts wise, let me know.
1990 Notchback Mustang...92,xxx miles...SOLID Fl/Az car..clean title and i have it! my last idea was to do a nice LSx/th400 based twin turbo setup, but it's just taking too long to get the money together for this to be comleted and i've been without a nice quick street car for almost 2 yrs now, and i'm tired of it. i'll take a BIG loss as usual, but if it helps someone else out, then good for them. the car features the following........
8pt through the dash C/M cage....all tig welded with dual swingout doorbars.
New-Florida 5.0 gauge cluster assy with all AutoMeter Ultralite gauges.
Fresh Professionally converted "Black" interior, nearly complete. i have a pair of door panels too, not pictured in link, but included.
Engine bay smoothed and painted satin black and all wiring tucked inside fenders. NICE!
New-Weld Draglites 15x3.5
New-Goodyear front runners
New/altered-Racecraft tubular k-member & a-arms.
New-Strange drag brakes.
New-Strange manual master cylinder.
New-Strange shocks & springs.
New-coilover fronts, bump steer kit.
New-Flaming River manual rack & shaft.
New-Batt. box, Oddysey batt, & cutoff switch mounted.
Stock tank has been cleaned out & baffles welded inside with large -10 fuel feed & -8 fuel return, functioning fuel level sensor.
New-3 ft. of -10/-8 Earl's Pro-Lite 350 hose for fuel feed/return.
Stock 8.8 & rear susp for rolling chassis.
let me know.
$3500. Firm!
Fresh-Built 8.8, 33 spline, spool, 3.73's, girdle, welded tubes, 9" ends, spherical bushings, ($1600 to duplicate)
lightly used- Adj. RaceCraft upper & UPR adj. lower controls arms, with solid ends
New-UPR Pro series anti roll bar (new in box)
Almost New-Strange adj shocks (about 30 passes)
Aeromotive A-1000 pump (idle time only) & filter (new in box)
New-17 ft. of Earl's Pro-Lite 350 -10 & -8 fuel lines. (the good stuff!)
New-Wild Rides upper & lower battle box kit (new in box)
New-D/S safety loop (new in box)
New-2 Kirkey Pro Street buckets
New-2 Kirkey black covers
New-Spal dual 11" Electric fans 2780 cfm (new in box)
New/altered by Billingsley-AFCO thick aluminum radiator (new in box/fits Mustang)
I'm sure there's more i'm forgetting.
$5500. FIRM!
http://www.corral.net/forums/showthread.php?t=821386
thanks,
Dave
i'm selling out my big dreams of huge HP. i've got a deposit down on a complete running/driving street car from texas i will be buying here in under 2 weeks. i would like to have this car gone, so i'm posting here as well as a couple other places like chitown & corral. anyway, let me know if you're interested. further down the page i've posted a link. you'll see i have some high quality components i've gathered that i can make a bit of a better deal on to whomever buys the chassis. if you see anything you're interested in parts wise, let me know.
1990 Notchback Mustang...92,xxx miles...SOLID Fl/Az car..clean title and i have it! my last idea was to do a nice LSx/th400 based twin turbo setup, but it's just taking too long to get the money together for this to be comleted and i've been without a nice quick street car for almost 2 yrs now, and i'm tired of it. i'll take a BIG loss as usual, but if it helps someone else out, then good for them. the car features the following........
8pt through the dash C/M cage....all tig welded with dual swingout doorbars.
New-Florida 5.0 gauge cluster assy with all AutoMeter Ultralite gauges.
Fresh Professionally converted "Black" interior, nearly complete. i have a pair of door panels too, not pictured in link, but included.
Engine bay smoothed and painted satin black and all wiring tucked inside fenders. NICE!
New-Weld Draglites 15x3.5
New-Goodyear front runners
New/altered-Racecraft tubular k-member & a-arms.
New-Strange drag brakes.
New-Strange manual master cylinder.
New-Strange shocks & springs.
New-coilover fronts, bump steer kit.
New-Flaming River manual rack & shaft.
New-Batt. box, Oddysey batt, & cutoff switch mounted.
Stock tank has been cleaned out & baffles welded inside with large -10 fuel feed & -8 fuel return, functioning fuel level sensor.
New-3 ft. of -10/-8 Earl's Pro-Lite 350 hose for fuel feed/return.
Stock 8.8 & rear susp for rolling chassis.
let me know.
$3500. Firm!
Fresh-Built 8.8, 33 spline, spool, 3.73's, girdle, welded tubes, 9" ends, spherical bushings, ($1600 to duplicate)
lightly used- Adj. RaceCraft upper & UPR adj. lower controls arms, with solid ends
New-UPR Pro series anti roll bar (new in box)
Almost New-Strange adj shocks (about 30 passes)
Aeromotive A-1000 pump (idle time only) & filter (new in box)
New-17 ft. of Earl's Pro-Lite 350 -10 & -8 fuel lines. (the good stuff!)
New-Wild Rides upper & lower battle box kit (new in box)
New-D/S safety loop (new in box)
New-2 Kirkey Pro Street buckets
New-2 Kirkey black covers
New-Spal dual 11" Electric fans 2780 cfm (new in box)
New/altered by Billingsley-AFCO thick aluminum radiator (new in box/fits Mustang)
I'm sure there's more i'm forgetting.
$5500. FIRM!
http://www.corral.net/forums/showthread.php?t=821386
thanks,
Dave
Last edited by PRAY HRD; 08-13-2006 at 06:17 PM.
08-07-2006 | 09:47 PM
#3
Thread Starter
9 Second Club
iTrader: (119)
Joined: Aug 2003
Posts: 2,972
Likes: 1
From: CISSNA PARK, IL
don't you hate that! lol. new link added.........here it is again.
http://www.corral.net/forums/showthread.php?t=821386
http://www.corral.net/forums/showthread.php?t=821386
08-13-2006 | 05:35 PM
#5
Thread Starter
9 Second Club
iTrader: (119)
Joined: Aug 2003
Posts: 2,972
Likes: 1
From: CISSNA PARK, IL
New lower price listed @ $3500. i'm taking a bath on this guys.......$5500 for the race type rear end & suspension, kirkeys, fans, pump & filter, and whatever else i've got. i've got almost $10,000 in the car & parts so far, not counting several thousand in labor too. let me know. this would be a great project for an LSx based setup!!! 
Last edited by PRAY HRD; 08-13-2006 at 06:09 PM.
