Guys, I need help pricing stock 5.7 & 5.3 heads, 5.3 shortblock, & misc......
10-25-2006, 08:11 PM
#1
Guys, I need help pricing stock 5.7 & 5.3 heads, 5.3 shortblock, & misc...... hey all........
i've never bought or sold stock motor stuff before and was wondering if any of you could help me out some? i'm not looking for top dollar at all, but a fair price to free up some cash and hopefully help someone else out. i took all this stuff in as partial trade for a built sbc i sold some time ago, so i don't know how many miles are on any of it so please keep that in mind.
valley cover with knock sensors from a 5.3......
317 heads, complete and look great......
853 heads, same as above............
stock rockers still bolted on the 853 heads.......
stock ?????? mileage 5.3 shortblock with front covers still in place (so is timing set & cam) rear cover, balancer/pulley, flexplate, cam sensor, motor mounts, oil pan & sensor..........I can turn the motor over by hand with the 853 heads bolted on and hear the compression leakdown after every little movement. it's not at all easy to turn, but i'm not using anything but my hands so i'm 100% sure it's at least not a siezed motor......
stock pushrods & lifters from 5.3..........
5.7 bare block & crank with a very mild appearing spun rod bearing issue. i was told that he had it looked at and was told by a machine shop that it would not be a problem, but then he ended up buying my race motor...........
stock valve covers.......
coil packs & brackets...........
stock 5.3 truck intake manifold complete with T-body, fuel rails, & injectors......
any and all help is greatly appreciated. remember, i'm not looking for top dollar, just a fair price or going rate.
thanks,
Dave
i've never bought or sold stock motor stuff before and was wondering if any of you could help me out some? i'm not looking for top dollar at all, but a fair price to free up some cash and hopefully help someone else out. i took all this stuff in as partial trade for a built sbc i sold some time ago, so i don't know how many miles are on any of it so please keep that in mind.
valley cover with knock sensors from a 5.3......
317 heads, complete and look great......
853 heads, same as above............
stock rockers still bolted on the 853 heads.......
stock ?????? mileage 5.3 shortblock with front covers still in place (so is timing set & cam) rear cover, balancer/pulley, flexplate, cam sensor, motor mounts, oil pan & sensor..........I can turn the motor over by hand with the 853 heads bolted on and hear the compression leakdown after every little movement. it's not at all easy to turn, but i'm not using anything but my hands so i'm 100% sure it's at least not a siezed motor......
stock pushrods & lifters from 5.3..........
5.7 bare block & crank with a very mild appearing spun rod bearing issue. i was told that he had it looked at and was told by a machine shop that it would not be a problem, but then he ended up buying my race motor...........
stock valve covers.......
coil packs & brackets...........
stock 5.3 truck intake manifold complete with T-body, fuel rails, & injectors......
any and all help is greatly appreciated. remember, i'm not looking for top dollar, just a fair price or going rate.
thanks,
Dave
