I want your opinion!
#1
12 Second Club
Thread Starter
Join Date: Mar 2004
Location: Columbus
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am thinking about selling my TA, and i am not sure what I should ask? What would you pay for my car?
98 TA 98k
Orange tri color paint
SLP ram air HO hood
Chrome Z06 wheels 17x8/17x9.5
BFG comp ta 245/45zr17
BFG DR 315/35r17
Phillips built LS1 2000 block
347 balanced/blueprinted
stk crank
calico coated engine bearings
arp main studs
Eagle H-beam rods
L19 rod bolts
JE nitrous pistons(w/ current heads 10.8 comp.)
friction coated skirts/thermal coated tops
file fit rings set loose for a 400 shot(with different heads,stk heads WILL lift)
24x/25x 6xx/6xx on a 112 (makes power from 3000-7600)
one peice comp push rods 7.400
stk rockers (suggest upgrading to Jesel's)
LS2 timing chain
ported LS6 pump
ported heads by Phillips Racing Engines
2.055int/1.60exh
patriot gold double springs
titanium retainers
super7 locks
Felpro MLS gaskets
arp head studs
ported LS6 intake
80mm tb
36lb injectors
underdrive harmonic balancer
Hooker lt's
3"y with flowmaster merge to 4"
4" mufflex exhaust
T-56 trans
Spec stg 3 clutch
B&M ripper shifter
custom 3" chromoly driveshaft
Spohn tq arm(chassis mounted)
Hotchkis LCA and panhard bar
air bag in the right side
Moser 9" with back brace(good for 1000+hp)
strange center section
31 spline no-spin detroit locker
4.11 gears
alum. daytona pinion support
Moser 31 spline axles w/ long wheel studs
walbro 340 in tank pump
300 hp nitrous kit(NOS)
bottle heater
bottle blanket
MSD digital window switch
auto meter shift light
http://i33.photobucket.com/albums/d5...A/100_1860.jpg
http://i33.photobucket.com/albums/d5...A/100_1893.jpg
http://i33.photobucket.com/albums/d5...A/100_1706.jpg
I am probably forgetting some things,but just to give you an idea. I am not positive about selling it but it would make it alot nicer with buying a new house. I would build another toy in a few years, probably a C5 with a solid axle!
thanks for the input,John
98 TA 98k
Orange tri color paint
SLP ram air HO hood
Chrome Z06 wheels 17x8/17x9.5
BFG comp ta 245/45zr17
BFG DR 315/35r17
Phillips built LS1 2000 block
347 balanced/blueprinted
stk crank
calico coated engine bearings
arp main studs
Eagle H-beam rods
L19 rod bolts
JE nitrous pistons(w/ current heads 10.8 comp.)
friction coated skirts/thermal coated tops
file fit rings set loose for a 400 shot(with different heads,stk heads WILL lift)
24x/25x 6xx/6xx on a 112 (makes power from 3000-7600)
one peice comp push rods 7.400
stk rockers (suggest upgrading to Jesel's)
LS2 timing chain
ported LS6 pump
ported heads by Phillips Racing Engines
2.055int/1.60exh
patriot gold double springs
titanium retainers
super7 locks
Felpro MLS gaskets
arp head studs
ported LS6 intake
80mm tb
36lb injectors
underdrive harmonic balancer
Hooker lt's
3"y with flowmaster merge to 4"
4" mufflex exhaust
T-56 trans
Spec stg 3 clutch
B&M ripper shifter
custom 3" chromoly driveshaft
Spohn tq arm(chassis mounted)
Hotchkis LCA and panhard bar
air bag in the right side
Moser 9" with back brace(good for 1000+hp)
strange center section
31 spline no-spin detroit locker
4.11 gears
alum. daytona pinion support
Moser 31 spline axles w/ long wheel studs
walbro 340 in tank pump
300 hp nitrous kit(NOS)
bottle heater
bottle blanket
MSD digital window switch
auto meter shift light
http://i33.photobucket.com/albums/d5...A/100_1860.jpg
http://i33.photobucket.com/albums/d5...A/100_1893.jpg
http://i33.photobucket.com/albums/d5...A/100_1706.jpg
I am probably forgetting some things,but just to give you an idea. I am not positive about selling it but it would make it alot nicer with buying a new house. I would build another toy in a few years, probably a C5 with a solid axle!
thanks for the input,John
#2
11 Second Club
iTrader: (4)
Join Date: May 2007
Location: Chicagoland
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just a guess with the milage... 16.5-18ish. Its hard to say, I mean, its WORTH more, but getting someone to part with that money is a different story... I know I would want more than that, but we all know how the mods go, really lose money in that aspect.
Not trying to be rude or anything either.. No disrespect ment.
Not trying to be rude or anything either.. No disrespect ment.