Indy People....check-in and say hi!
10-29-2011, 07:26 AM
#7222
10-30-2011, 10:51 PM
#7228
Teching In
Join Date: Feb 2008
Location: Indy
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
St. Louis has been ok, but the area I live in now is full of Audis, BMWs, Benzs, and Lexuses (probably how the NE side of Indy is). It'll be nice seeing some domestic V8s.
10-31-2011, 10:14 AM
#7230
Teching In
Join Date: Feb 2008
Location: Indy
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Cams (equivalent of a GM hot cam)
Full exhaust
Ported intake
Geared
Bolt-ons
Minus more aggressive cams, a few suspension pieces, and tires, I've done about all I can to this N/A 4.6 without adding displacement.
10-31-2011, 11:09 AM
#7231
Yeah that's it but the paint doesn't look as good now. And by not as good I mean it looks terrible (the clear coat is coming off everywhere). As far as what's in it:
Cams (equivalent of a GM hot cam)
Full exhaust
Ported intake
Geared
Bolt-ons
Minus more aggressive cams, a few suspension pieces, and tires, I've done about all I can to this N/A 4.6 without adding displacement.
Cams (equivalent of a GM hot cam)
Full exhaust
Ported intake
Geared
Bolt-ons
Minus more aggressive cams, a few suspension pieces, and tires, I've done about all I can to this N/A 4.6 without adding displacement.
11-01-2011, 11:56 AM
#7234
12 Second Club
iTrader: (2)
Join Date: Feb 2011
Location: Galveston, IN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Ya if your swapin blocks you can pick up complete 5.3 engines for around $200... Somthin to think about... Either way welcome bro hope to see u around in the spring!
aaron
aaron
11-01-2011, 07:40 PM
#7235
Teching In
Join Date: Feb 2008
Location: Indy
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Yeah 5.4s are dirt cheap. The problem is the good intakes for C heads on a 5.4 cost as much as a used blower setup. Once you get that intake though those motors make some good numbers. I'm almost tempted to run stock 4V heads/cams with the 5.8 to see what numbers it makes compared to the LS1 then turn around and do a cam swap.
11-01-2011, 08:12 PM
#7237
Teching In
Join Date: Feb 2008
Location: Indy
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
11-02-2011, 08:06 AM
#7238
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
That'd be very cool. And very different as well. 
Good luck with it!
Theres a local guy I hang with who has a cammed mach 1 and he has some spray on it too. It runs good!
Good luck with it!
Theres a local guy I hang with who has a cammed mach 1 and he has some spray on it too. It runs good!
11-03-2011, 08:57 PM
#7240
Teching In
Join Date: Feb 2008
Location: Indy
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I'm from Rockville. I went to school the last few years in St. Louis because it has one of the best Chiropractic schools and was closest to home. Now I'm just moving back. I chose Indy because in and near my home town doesn't have a good chiropractor to population ratio.
BTW I was in Greenwood/Whiteland/Franklin today and I saw more domestic V8s today in this horrible weather than I have seen in the past 5 months here in west county St. Louis. I got to talking to my realtor about cars and he said he has an LT4 Vette
BTW I was in Greenwood/Whiteland/Franklin today and I saw more domestic V8s today in this horrible weather than I have seen in the past 5 months here in west county St. Louis. I got to talking to my realtor about cars and he said he has an LT4 Vette