I'd like to introduce myself a little bit
#1
I'd like to introduce myself a little bit
My name is Kubus. Im 20 and Im living in Chicago at the moment. Im from Ontario but work has taken me to Chicago for the summer. I should be back in Ontario in September but for the time being Im in Chicago.
I have a 1991 Camaro RS that I bought when I was 16. I bought it with a 3.1L V6 with an automatic tranny. I hated it but I dealt with it until last year. Last year I swapped in a LS1/T56 combo and it really brought the car to life.
Since then I have added a Walbro 255lph pump, LS7 clutch, C5 front brakes, LS1 rear brakes, EBC spot drilled and slotted sport rotors, EBC Greenstuff pads, Canuck Motorsports springs, C6 wheels, TA leather interior, some stereo stuff, custom blue paint, Z28 grille and probably some other fun stuff that Im missing.
This past weekend I picked up a hybrid rear end that was built for me by another member of this forum (cam-). It is a Ford 8.8inch centre section, fourth gen width, moser axles, motive gears (4.10), Detroit truetrac posi, 1350 yoke etc.
Here are some pics of my car and some of the new rear end install
Old ten bolt
New one
Car is going in hopefully this week for cam install at Straightline Performance. Cant wait to see how it does.
I have a 1991 Camaro RS that I bought when I was 16. I bought it with a 3.1L V6 with an automatic tranny. I hated it but I dealt with it until last year. Last year I swapped in a LS1/T56 combo and it really brought the car to life.
Since then I have added a Walbro 255lph pump, LS7 clutch, C5 front brakes, LS1 rear brakes, EBC spot drilled and slotted sport rotors, EBC Greenstuff pads, Canuck Motorsports springs, C6 wheels, TA leather interior, some stereo stuff, custom blue paint, Z28 grille and probably some other fun stuff that Im missing.
This past weekend I picked up a hybrid rear end that was built for me by another member of this forum (cam-). It is a Ford 8.8inch centre section, fourth gen width, moser axles, motive gears (4.10), Detroit truetrac posi, 1350 yoke etc.
Here are some pics of my car and some of the new rear end install
Old ten bolt
New one
Car is going in hopefully this week for cam install at Straightline Performance. Cant wait to see how it does.
#4
#5
Don't give up that car. I still have my first vehicle for 9 years and swapped a ls1/t56 into it. Did the ls7 clutch in june with a trans rebuild. Going to do the tires, slide-a-link, and c5/c6 rear brakes. My buddy had the same camaro as his first and if he seen what you did he'd go buy another to start a rebuild. Boy you don't wait around to find the right guys to do a dyno. I haven't been since my ls1 has stock internals but I do all the car shows and goto route 66 and everyone likes straightline.
Trending Topics
#17
I took all the pics myself. They're all HDR'd except for the black and white one. I just desaturated that one. But all of the work was done in Photoshop. Other than the HDR and desaturation, nothing was changed
#20
That looks awesome, love the color, one of the things that I noticed is the old yellowed coolant bottle in the nice clean engine bay with the new engine. If you haven't replaced them by now let me know, I just took the originals off my GTA with 2600 miles to replace them with new ones, they are still available from the dealer, but I have my originals in damn near new condition that I can give you, other wise I'll prolly toss them. Let me know.
Nice looking car!
Nice looking car!