421 Solid Roller Dyno Vid 608 RWHP
#1
Thread Starter
10 Second Club + 14 Second Truck Club
iTrader: (3)
Joined: Nov 2003
Posts: 493
Likes: 0
From: Ne Pa
421 Solid Roller Dyno Vid 608 RWHP
Finally got to post up the dyno videos from the car. The thing drives great and runs on pump gas.
I'm not telling you it drives like stock, but for what it is it's not bad.
2001 Trans-Am WS6 M6
421 Iron Block
12.5:1
ETP 255’s
Rapid Motorsports Dominator Solid Roller Cam
Jesel J2K 1.7’s
Beck Sheet Metal Intake
Fast 90mm
Pump Gas
Kooks 1 7/8 x 2 x 3 ½ stepped headers with off road pipes
Kooks Y-pipe
Mufflex 4” catback
Textralia Twin Disk
D&D Viper Spec T-56
Denneys nitrous shaft
Moser 12 bolt, 4.11 gears
608rwhp 496rwtq
The rattling you hear is the broken exhaust cutout, the shaft was broken and rattling like crazy
Dyno 1
Dyno 2
I'm not telling you it drives like stock, but for what it is it's not bad.
2001 Trans-Am WS6 M6
421 Iron Block
12.5:1
ETP 255’s
Rapid Motorsports Dominator Solid Roller Cam
Jesel J2K 1.7’s
Beck Sheet Metal Intake
Fast 90mm
Pump Gas
Kooks 1 7/8 x 2 x 3 ½ stepped headers with off road pipes
Kooks Y-pipe
Mufflex 4” catback
Textralia Twin Disk
D&D Viper Spec T-56
Denneys nitrous shaft
Moser 12 bolt, 4.11 gears
608rwhp 496rwtq
The rattling you hear is the broken exhaust cutout, the shaft was broken and rattling like crazy
Dyno 1
Dyno 2
Trending Topics
#9
#10
[QUOTE=KCFormula;10532363]Thats the beck intake. I'll have to get a graph of mine up and you can see there is a huge difference in tq. but the trade off is peak hp.
QUOTE]
It is also the 4" exhaust with big stepped headers but like you said the trade off is peak hp which is what I think he wanted for his purposes. I also thought it sounded very tame down low, that is why I asked for a separate idle outside vid.
QUOTE]
It is also the 4" exhaust with big stepped headers but like you said the trade off is peak hp which is what I think he wanted for his purposes. I also thought it sounded very tame down low, that is why I asked for a separate idle outside vid.
#11
pretty mean set up what i would like to know is every body i talk to a bout cams when i say i want to go with a solid roller build up every body say's it will not last ???? and will give me a bunch of problems what do's a solid roller cam do so bad i think the sound and hp gains would be way.. better
i would love to see hear some idle/rev clips and drive by's @ WOT.....
i would love to see hear some idle/rev clips and drive by's @ WOT.....
#12
Thread Starter
10 Second Club + 14 Second Truck Club
iTrader: (3)
Joined: Nov 2003
Posts: 493
Likes: 0
From: Ne Pa
pretty mean set up what i would like to know is every body i talk to a bout cams when i say i want to go with a solid roller build up every body say's it will not last ???? and will give me a bunch of problems what do's a solid roller cam do so bad i think the sound and hp gains would be way.. better
i would love to see hear some idle/rev clips and drive by's @ WOT.....
i would love to see hear some idle/rev clips and drive by's @ WOT.....
I have the videos of idle and a rev, I'll post them up later today, not gonna see a drive by, it snowed the other day and there is salt on the road, the car is in the garage for the winter.
#13
Thread Starter
10 Second Club + 14 Second Truck Club
iTrader: (3)
Joined: Nov 2003
Posts: 493
Likes: 0
From: Ne Pa
as said above it has 1 7/8 - 2" step headers and a Beck intake so the torque is low but hp stays flat all the way to 7500 rpm.
with that said until the car is in 3rd gear you can't put the throttle on the floor unless you want to have the tires go up in smoke, more torque down low would be usless anyway for the street.
Last edited by antz01ta; 11-24-2008 at 05:27 AM.
#14
A solid roller is fine as long as you keep an eye on valve clearance and pull a spring once in a while to check pressures.
I have the videos of idle and a rev, I'll post them up later today, not gonna see a drive by, it snowed the other day and there is salt on the road, the car is in the garage for the winter.
I have the videos of idle and a rev, I'll post them up later today, not gonna see a drive by, it snowed the other day and there is salt on the road, the car is in the garage for the winter.
Looking forward to it. Very cool. Thanks man.
#18
Will do. Not sure on intake just yet and the cam will be slightly smaller with mid 700's lift on a 110 and 1.8 rockers. Same compression right around 12.4 or so. Should be done in the middle of winter. Yay! I will def post up when done. Whose v.covers are those? They look really good on that setup.
#20
Thread Starter
10 Second Club + 14 Second Truck Club
iTrader: (3)
Joined: Nov 2003
Posts: 493
Likes: 0
From: Ne Pa
Will do. Not sure on intake just yet and the cam will be slightly smaller with mid 700's lift on a 110 and 1.8 rockers. Same compression right around 12.4 or so. Should be done in the middle of winter. Yay! I will def post up when done. Whose v.covers are those? They look really good on that setup.
They are Moroso