3rd Gen Pics Only!!!! ***DON'T QUOTE PICS!!!***
#41
12 Second Club
iTrader: (5)
and some of the car now that were taken by his wife
it took a lot of work to bring that thing back. runs high 9s on the squeeze. but now you really cant tell it was damaged unless you look up close at it. and since this the motor was pulled and is getting swapped for a big block
it took a lot of work to bring that thing back. runs high 9s on the squeeze. but now you really cant tell it was damaged unless you look up close at it. and since this the motor was pulled and is getting swapped for a big block
#43
here is some more pictures of mine since i should be adding pictures. lol
my older car. it had a built 357 cu inch small block with a swapped t56.
my 84 before someone backed into the front end.
my older car. it had a built 357 cu inch small block with a swapped t56.
my 84 before someone backed into the front end.
Last edited by CRAGER; 11-08-2009 at 04:47 PM.
#44
10 Second Club
iTrader: (7)
Join Date: Aug 2007
Location: NYC
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Here's my thirdgen birds
1989 GTA, bought from the original owner in 1997 and was an L98 automatic but now has a stockish 3.8L Turbo and runs 10.50 @ 128mph on C16 and 11.06 @ 120mph on straight 93 octane. Was also featured in the May 2007 issue of GMHTP
TTA#124, 1 of 187 cloth/t-top cars built and is also Indy Festival car #96. Went through a mini frame on resto right before the 2009 Hot Rod Power Tour and will be at the T/A Nats next week.
TTA#850, 1 of 1,324 leather/t-top cars built it's a bone stock 62K mile car that I've had scince the late 90's. Was on the cover of the Dec 2005 issue of GMHTP and scince then has gone 13.37 @ 103.85mph. Not bad for a stock 20 year old V6
TTA#884, 1 of 15 cloth/hardtop cars built. Drove it home from Reno in 2002 and is stock with 52K miles. The sun out west wasnt too nice to it and the paint is a bit faded and will get a repaint but for now I just enjoy owning/driving such a rare car.
Hope you guys like, I'm new to fourth gens and this site but been around thirdgens as long as I can remember.
Steve
1989 GTA, bought from the original owner in 1997 and was an L98 automatic but now has a stockish 3.8L Turbo and runs 10.50 @ 128mph on C16 and 11.06 @ 120mph on straight 93 octane. Was also featured in the May 2007 issue of GMHTP
TTA#124, 1 of 187 cloth/t-top cars built and is also Indy Festival car #96. Went through a mini frame on resto right before the 2009 Hot Rod Power Tour and will be at the T/A Nats next week.
TTA#850, 1 of 1,324 leather/t-top cars built it's a bone stock 62K mile car that I've had scince the late 90's. Was on the cover of the Dec 2005 issue of GMHTP and scince then has gone 13.37 @ 103.85mph. Not bad for a stock 20 year old V6
TTA#884, 1 of 15 cloth/hardtop cars built. Drove it home from Reno in 2002 and is stock with 52K miles. The sun out west wasnt too nice to it and the paint is a bit faded and will get a repaint but for now I just enjoy owning/driving such a rare car.
Hope you guys like, I'm new to fourth gens and this site but been around thirdgens as long as I can remember.
Steve
#46
On The Tree
iTrader: (4)
Join Date: Aug 2009
Location: Nebraska
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Here is my 89 IROC I owned. A 5.7 TPI Car. It now sits in a persons garage after he totally disassembled it. Been that way for about 10 years.
He took it and another car out during a poker run.
#57
TECH Fanatic
iTrader: (17)
Man...This thread is REALLY making me want to re-paint my 86.
Here's my 87 before it was wrecked in a chain reaction wreck.
And my current car...the 86. Garage kept all its life, til I got it. Now the clear coat is waving bye bye since it sees the sun so much more.
I have about a 50/50 blend of 4th gen LS1 parts and 3rd gen original parts...and its fantastic...IMO of course.
I want to re-paint it soon...trying to decided between a dark blue metallic like original, or going back to black. Nothing is sexier than a deep black thirdgen TA..again, just my opinion.
J.
Here's my 87 before it was wrecked in a chain reaction wreck.
And my current car...the 86. Garage kept all its life, til I got it. Now the clear coat is waving bye bye since it sees the sun so much more.
I have about a 50/50 blend of 4th gen LS1 parts and 3rd gen original parts...and its fantastic...IMO of course.
I want to re-paint it soon...trying to decided between a dark blue metallic like original, or going back to black. Nothing is sexier than a deep black thirdgen TA..again, just my opinion.
J.
#58
TECH Fanatic
iTrader: (3)
Heres another amazing 3rd gen . Hopefully the guy doesnt mind pics being posted over here . The back 1/2 of the car was widened by 1" in similar fashion a the 90-95 ZR1 was . The body shop did an amazing job , it looks factory . Other tid bits 454 LSx , t56 18x12 iforged wheels in the rear with 335 tires . I posted a link to the ongoing build thread over @ thirdgen.org . If u ever have some time to kill , the thread is 40 some pages long with about 1700 posts I posted a few pics below , theres MANY more of all the stages of fabrication in the original thread .
http://www.thirdgen.org/techboard/bo...one-phase.html
http://www.thirdgen.org/techboard/bo...one-phase.html
Last edited by CRAGER; 11-08-2009 at 04:50 PM.