Finally drag raced my car.
09-02-2010, 11:28 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: St. Cloud, MN
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Finally drag raced my car. First off, my car is basically a road course car only. But ever since I bought it I wanted to see at least what it could do. So, I finally had a chance to do a street drag deal at a near by strip, BIR. The track was preped just as it would for a street night. But, I knew I wasn't going to get any crazy 60 fts with my suspension setup, tires, and track prep. Anyways, I ran a best of 12.5@117, but my best trap was a 118 later in the day. And I was only pulling 5-6 psi, and I should get getting around 9psi with cooler temps. So, I see 120s on a cooler day. Anyways, videos are what matter here. 
One
Two
Three
One
Two
Three
09-03-2010, 06:48 PM
#6
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: St. Cloud, MN
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys.
There's isn't too much done to the motor other then a Vortec Blower, Comp 318 springs, LTs, and a Borla exhaust. Then it's things like LCAs and relocation brackets, PHR, 3.73 gears, built tranny, Spec 3 clutch, Pro-Kit, Koni Double Adjs up front, KYBs in the rear, the list goes on. Car makes 475/450 when it does hit 9psi. I was surprised how well the street tires hooked on my car. I'd drop the clutch around 1500 feather first gear, then mash it around the 60ft area.
There's isn't too much done to the motor other then a Vortec Blower, Comp 318 springs, LTs, and a Borla exhaust. Then it's things like LCAs and relocation brackets, PHR, 3.73 gears, built tranny, Spec 3 clutch, Pro-Kit, Koni Double Adjs up front, KYBs in the rear, the list goes on.
Car makes 475/450 when it does hit 9psi. I was surprised how well the street tires hooked on my car. I'd drop the clutch around 1500 feather first gear, then mash it around the 60ft area.