1300rwhp PUMP GAS corvette
#23
Launching!
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
RC, I think you have just about 90% of the guys on this sites dream car...
You better post up some vids of it on the street as well! I'd like to see a speedo sweep or something to give an idea of the "Feroshuness" of a car of this caliber. (I'm pretty sure I spelled feroshus wrong, but I don't give a ****... The boner I've got from this car makes it ok!)
You better post up some vids of it on the street as well! I'd like to see a speedo sweep or something to give an idea of the "Feroshuness" of a car of this caliber. (I'm pretty sure I spelled feroshus wrong, but I don't give a ****... The boner I've got from this car makes it ok!)
#24
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Like LMR knows what they are doing. Their 3400+ lb car on true 10's can only run 209 mph in the quarter.
Obviously, they need a hand from someone like APE, APS turbo kits, Rob Raymer, Incon Turbos and other greats in the LSX industry to help get this car figured out.
Obviously, they need a hand from someone like APE, APS turbo kits, Rob Raymer, Incon Turbos and other greats in the LSX industry to help get this car figured out.
#26
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Remember the APE engine build Group Purchase.
Sell 35 408's.... and make 5 that run and 10 that spin bearings.
#30
On The Tree
iTrader: (4)
Join Date: May 2007
Location: Katy, Texas
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
here is the build thread in the texas section:
https://ls1tech.com/forums/texas-mem...l#post14127140
#32
LS1TECH Sponsor / 7 Second Club
iTrader: (2)
Join Date: Dec 2001
Location: Houston
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As for putting it down on the street. It has a boost by gear set up. Thats the beauty of turbos. I can get this car to make 600 rwhp or 1800 rwhp.
#34
TECH Senior Member
iTrader: (2)
Join Date: Sep 2003
Location: Houston
Posts: 10,591
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
They will be pushing the factory aero pieces to the max but they have a great set of guys to have new body components fabricated (Fulmer and GoldRust)
Can't wait to see this thing. Definitely want to catch a ride in it!
#36
TECH Resident
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That is a fantastic # and I can see where some of the other members are confused, especially on pump gas. Big intercooler and methanol reduce intake temperatures to the point where an engine can make power and live!
Well you just have to know what your doing to get those numbers. The firt thing that allows us to do this, is the turbo system is very efficient, second is the air to water intercoolers, and third is the methonal. With out the meth my air temps at the end of the pull are only 80 degrees. With the methonal on they are 57 degrees.
When you have iat's like that you can push these things way harder. RC will get the car back with a safer tune in it, but it still made 1227 rwhp on 14 psi. If any of you are in town we can take a cruise to the connoco down the street and fill her up and then roll it after that. Like I said when you purpose build a set up like this a ton of thought goes into making the setup work. One of RC's goals was to make a big number on pump, and he was here to fill it up with the fuel he got from Connoco. As for you haters, haha, come get some.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#37
Sex On Wheels
iTrader: (19)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
From the Texas Section thread:
Well, we only spent an hour on the dyno today. We really were not trying to make so much power so soon but oh well. Car already put down 1300rwhp on 93 octane within the first 5 dyno pulls with no methonal. This car has ALOT of tuning still left. She is going to be a MONSTER with race gas and methonal. Enjoy!![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#38
TECH Apprentice
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
https://ls1tech.com/forums/texas-mem...show-5-rc.html
from my understanding this is 100% street car that can be driven street or strip
#39
#40
TECH Senior Member
Join Date: Apr 2004
Location: Houston / University of Texas, Austin
Posts: 6,955
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
gonna be a fun fall/spring. great stuff again josh.
also thank for helping out my buddy (marcus) had the white z28 with RS body kit that apparently needed a retune and other little misc bullshit.