Souless- Street Car - Coming out party and Thanks
12-28-2010, 12:12 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Norco, Louisiana
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Souless- Street Car - Coming out party and Thanks Well guys, its been a long time since I have been on Tech. Mostly because when my last ride got stolen and stripped I was pretty pissed off and wasnt sure that I would be getting a new ride to start modding again. Well a few years later and it looks like I may have finally gotten my groove back. Keep in mind this is a STREET CAR, inspection and all. I drove it 350 miles to Houston a few times and around town when time permits. The ride is a little rough but very tolerable.
I have never posted an list of mods for it before so I figure this would be a good coming out post:
Car:
1999 Camaro SS
Drive Train:
408 Stroker Built by Futral Motorsports
M6 Rebuilt by Futral Motorsports
Monster Clutch Level 5
Moser 9in 4.11's
Nitrous Drive shaft
Suspension (all installed by Madman & Co. Racing)
AFCO 12 way adj shocks
AFCO springs
BMR TQ arm
BMR PHB
BMR LCA's
BMR 6speed Crossmember
BMR K-Member
BMR Front A-Arms
BMR Subframes
Interior:
Wolf Chromoly 6 Point Cage with Swingouts (Madman Installed)
Autometer Cobalt C2 Electronic Nitrous Gauge
Autometer Cobalt C2 Electronic Fuel Gauge
Scat Procar Seats (Madman Custom seat sliders)
Stroud 5 Point harnesses
Grant Steering Wheel
Pro 5.0 shifter
Swapped from gray to all black panels
Custom Headliner and sun visors (Removed Mirrors and seatbelt holes)
Exterior:
Onyx Black Factory Paint
VFN 3in Fiberglass SS Hood
American Racing Rebel Wheels 18s
Billet Specialties Drag Wheels (Fatties and Skinnies)
ET Streets Mounted to drag wheels
Exhaust:
QTP 3.5 Electric Cutout
Magnaflow Catback
Madman Racing custom center mount
Pumps:
Racetronix Fuel Pump
Electronic Water pump
Power Adder:
Coldfusion Nitrous Wet Kit
All motor Rear Wheel:
493HP/485TQ
With 100 shot Rear Wheel (need to verify Jets):
605HP/686TQ
That most of it, there was ALOT of little things such as remote opener, digital window switch, custom shift handle, stereo, seat sliders, etc.
You guys know as well as I do that a project like this is not easy, quick, or cheap, so there are a few thank you I want to throw out there.
Mostly I want to thank Madman and Co. Racing for all the late hours, sarcastic comments, Miller Light, and patience to compensate my lack of it. These guys are truly top notch and the best suspension and chassis guys in the business. They can also cook one hell of a brisket.
In addition, I also want to thank Futral Motorsports for all the AWESOME Motor and tranny, the late and long dyno hours (even over the holidays), custom tuning, random advice, and putting up with my lack of keeping track of time. In my opinion, Alan and his team are by far the best LS guys I have ever had the opportunity to work with and they crank out some spectacular street machines.
I also can’t forget all the great friends (no particular order) Gary T, Tim H, Alan F, Robbie R, Brian J, Toby S, Paul F, Mark C, Scottey M, Mike M, Tommy H, Whitey, all the guys at Texas Speed and Performance, Leo S, and my wife Gracie. If I missed someone, my bad, just can’t think all that well right now.
Here are some vids on the Dyno:
!Caution! Turn your speakers down and make sure no kids are around
Pull_1
http://www.youtube.com/watch?v=skmQHALz6XI
Pull_2
http://www.youtube.com/watch?v=fY5GWR5J6Wg
Pull_3
http://www.youtube.com/watch?v=Tm4e-SZPRIA
I have never posted an list of mods for it before so I figure this would be a good coming out post:
Car:
1999 Camaro SS
Drive Train:
408 Stroker Built by Futral Motorsports
M6 Rebuilt by Futral Motorsports
Monster Clutch Level 5
Moser 9in 4.11's
Nitrous Drive shaft
Suspension (all installed by Madman & Co. Racing)
AFCO 12 way adj shocks
AFCO springs
BMR TQ arm
BMR PHB
BMR LCA's
BMR 6speed Crossmember
BMR K-Member
BMR Front A-Arms
BMR Subframes
Interior:
Wolf Chromoly 6 Point Cage with Swingouts (Madman Installed)
Autometer Cobalt C2 Electronic Nitrous Gauge
Autometer Cobalt C2 Electronic Fuel Gauge
Scat Procar Seats (Madman Custom seat sliders)
Stroud 5 Point harnesses
Grant Steering Wheel
Pro 5.0 shifter
Swapped from gray to all black panels
Custom Headliner and sun visors (Removed Mirrors and seatbelt holes)
Exterior:
Onyx Black Factory Paint
VFN 3in Fiberglass SS Hood
American Racing Rebel Wheels 18s
Billet Specialties Drag Wheels (Fatties and Skinnies)
ET Streets Mounted to drag wheels
Exhaust:
QTP 3.5 Electric Cutout
Magnaflow Catback
Madman Racing custom center mount
Pumps:
Racetronix Fuel Pump
Electronic Water pump
Power Adder:
Coldfusion Nitrous Wet Kit
All motor Rear Wheel:
493HP/485TQ
With 100 shot Rear Wheel (need to verify Jets):
605HP/686TQ
That most of it, there was ALOT of little things such as remote opener, digital window switch, custom shift handle, stereo, seat sliders, etc.
You guys know as well as I do that a project like this is not easy, quick, or cheap, so there are a few thank you I want to throw out there.
Mostly I want to thank Madman and Co. Racing for all the late hours, sarcastic comments, Miller Light, and patience to compensate my lack of it. These guys are truly top notch and the best suspension and chassis guys in the business. They can also cook one hell of a brisket.
In addition, I also want to thank Futral Motorsports for all the AWESOME Motor and tranny, the late and long dyno hours (even over the holidays), custom tuning, random advice, and putting up with my lack of keeping track of time. In my opinion, Alan and his team are by far the best LS guys I have ever had the opportunity to work with and they crank out some spectacular street machines.
I also can’t forget all the great friends (no particular order) Gary T, Tim H, Alan F, Robbie R, Brian J, Toby S, Paul F, Mark C, Scottey M, Mike M, Tommy H, Whitey, all the guys at Texas Speed and Performance, Leo S, and my wife Gracie. If I missed someone, my bad, just can’t think all that well right now.
Here are some vids on the Dyno:
!Caution! Turn your speakers down and make sure no kids are around
Pull_1
http://www.youtube.com/watch?v=skmQHALz6XI
Pull_2
http://www.youtube.com/watch?v=fY5GWR5J6Wg
Pull_3
http://www.youtube.com/watch?v=Tm4e-SZPRIA
Last edited by Souless; 12-28-2010 at 12:19 PM. Reason: Need to clarify
12-28-2010, 12:52 PM
#3
LS1Tech Sponsor
Join Date: Jan 2009
Location: Bridge City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
"If I missed someone, my bad, just can’t think all that well right now."
You forgot me, but I forgive you. We've been glad to work with you - the car's lookin' badass!
You forgot me, but I forgive you. We've been glad to work with you - the car's lookin' badass!
__________________
"Cars don't squat, girls do."
Avoid nutswingers: for genuine Madman products, buy only from authorized dealers - http://madmanandcoracing.com/dealers.htm
Authorized dealer for AFCO, Mickey Thompson, and Strange Engineering
"Cars don't squat, girls do."
Avoid nutswingers: for genuine Madman products, buy only from authorized dealers - http://madmanandcoracing.com/dealers.htm
Authorized dealer for AFCO, Mickey Thompson, and Strange Engineering
12-28-2010, 01:06 PM
#4
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Norco, Louisiana
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Damn Ruth, I didn't forget you, I just figured that everyone knew you were the only one that got things done at the shop. Brian answers the phones and drinks the beer and you order, fabricate, build, install, pay bills, and pay everyone.
12-28-2010, 01:15 PM
#5
LS1Tech Sponsor
Join Date: Jan 2009
Location: Bridge City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
__________________
"Cars don't squat, girls do."
Avoid nutswingers: for genuine Madman products, buy only from authorized dealers - http://madmanandcoracing.com/dealers.htm
Authorized dealer for AFCO, Mickey Thompson, and Strange Engineering
"Cars don't squat, girls do."
Avoid nutswingers: for genuine Madman products, buy only from authorized dealers - http://madmanandcoracing.com/dealers.htm
Authorized dealer for AFCO, Mickey Thompson, and Strange Engineering
12-28-2010, 03:56 PM
#6
On The Tree
Join Date: Mar 2003
Location: Port Jervis, NY
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Looks slow as ****!! Also what good does 600+ do you pansy shifting little wimp lol!
No really bro it's really glad to see you getting to where you wanted to be 8 years ago. I can say after many hours spent on the old black you know what that you deserve it brother, keep up the good work and don't wait another 8 years to actually do something this time or I will call Brian and tell him to curb stomp your oger *** hahahaha!!
No really bro it's really glad to see you getting to where you wanted to be 8 years ago. I can say after many hours spent on the old black you know what that you deserve it brother, keep up the good work and don't wait another 8 years to actually do something this time or I will call Brian and tell him to curb stomp your oger *** hahahaha!!
12-28-2010, 05:11 PM
#7
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Norco, Louisiana
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Looks slow as ****!! Also what good does 600+ do you pansy shifting little wimp lol!
No really bro it's really glad to see you getting to where you wanted to be 8 years ago. I can say after many hours spent on the old black you know what that you deserve it brother, keep up the good work and don't wait another 8 years to actually do something this time or I will call Brian and tell him to curb stomp your oger *** hahahaha!!
No really bro it's really glad to see you getting to where you wanted to be 8 years ago. I can say after many hours spent on the old black you know what that you deserve it brother, keep up the good work and don't wait another 8 years to actually do something this time or I will call Brian and tell him to curb stomp your oger *** hahahaha!!