First pass with PTE 76mm, Go_Pro_Vid
#1
10 Second Club
Thread Starter
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
First pass with PTE 76mm, Go_Pro_Vid
From lsfest last weekend.
Car made 614 hp on 11psi; afr was in the 10's on the dyno, after the pass below, we leaned out the boost enrich. table and it trapped 135, the injectors couldn't keep up so i lifted before the traps each pass. Oh, and i'm still on a 10 bolt
http://www.youtube.com/watch?v=ORCMc4cXq1E
_
Car made 614 hp on 11psi; afr was in the 10's on the dyno, after the pass below, we leaned out the boost enrich. table and it trapped 135, the injectors couldn't keep up so i lifted before the traps each pass. Oh, and i'm still on a 10 bolt
http://www.youtube.com/watch?v=ORCMc4cXq1E
_
#4
10 Second Club
Thread Starter
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
10 Second Club
Thread Starter
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Honestly i'm not sure, i try not to think about it too much haha I have over 5k in the kit/turbo, and another 2k in the engine after everything was said and done at the machine shop and parts, with me and a friend putting it together. The small things at the autoparts store is what added up fast!
#11
Captain Double Post
iTrader: (2)
every dime is well worth it,you know alot of guys dont go the fi route at first because they think it cost to much,it does but alot of those guys that just go for a head and cam set up end up switching to fi anyway lol, i know if i would have started with boost as the goal i would have saved alot of money lol, killer ride though,
#13
10 Second Club
Thread Starter
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, it will be a legit 9 second street car in just a few weeks when i get the few issues sorted out with it.... Couldn't ask for a better setup