bad_408_vert

iTrader: (6)

whats your exhaust set up. sounds great

BOBS99SS

iTrader: (2)

Some helpful info, any mod you will do will make such an improvement, get some 4.10s that will help a ton, honest my car was a different car with 4.30s vs stock m6 gears1 7/8th headers and a good dual exhaust will help the car pull alot harder,my tsp duals made a sotp feel over my previous ory catback setyp,also fast setup will help as well,with my ms4 car every lil mod made such a difference, how high did you guys spin it to?also what was your injectors at?

RoadconeTuning

FWIW i've seen 45x made with a LS6 cam and ported 241's... made 430 on a stock 04 LS1 cam.

HioSSilver

iTrader: (8)

^^^^^sounds like a very generous correction factor.

1mean96ss

what are the corrected numbers ? Get some tires and come play with some of the cars in st. charles well see how it really runs.

SSpdDmon

iTrader: (10)

Nice car. The bucking is in the tune. This is my car in traffic with a Vengeance Racing Vindicator cam which has duration in the 240's and lift right around .600.

Tuned by yours truly, of course...

stlz/28

i have an ls1 motor with a fast 102 intake 92 mm tb, 30lb injectors , a k&n air fuel injection thing, 5.3 cnc ported and polished heads, a comp cams 228r cam and spring and pushrod set, it has yella terra rocker arms and pace setter long tubes with a or/y pipe and hooker exhaust, all running through a built t-56 tranny..... What kind of horsepower will i be looking at? thanks im fairly new to all of the ls stuff

adamantium

iTrader: (3)

Your cars badass man!

SSpdDmon

iTrader: (10)

Thanks! =)

Cjm1991

Sorry took me so long to get back to you guys, been crazy at work ect.. The cam is a tsp torquer v3. Don't know about the correction factor, sorry. Car runs great I can say that much, having owned 100+ built cars in my 35 or more years restoring and building bikes/cars. Not the fastest out there, but for what it made it's quick. I really don't have time these days to go cruise/race but when I do I'll just take it to gateway so I really know how it runs.

Cjm1991

The exhaust is QTP longtubes, custom y pipe with cats, and Slp lm2 catback with 3" tips

desertLS1

iTrader: (8)

Gorgeous car man! Enjoy it!

Put the CETA mod on it!

DoggyB22

iTrader: (2)

Not bad but its time to upgrade that 10 bolt! & throw some 4.10s or 4.30s in it! A must with a big cam. No dyno vid or pics of the sheet? What was the torque?