Cam idle video
Cam idle video Car is a 2000 with full exhaust m6 and stock heads. Has a Sns stage 3 cam from tick performance. Car is untuned so still waiting on final numbers
Last edited by Havok956; Mar 20, 2015 at 04:37 PM. Reason: Video embed
I bought the Brian tooley springs Martin recommended. I really like the idle and it sounds wicked with the cutout open 😈 hoping to get it tuned this coming up week. I'll post the numbers once I get them.
Well I'm not too sure what to think about the final numbers but it put down 360 rwhp. Didn't get a torque reading cause something was broken on the dyno from what I was told.
They said their dyno reads lower than others and that my car was running fine and not to worry about the dyno numbers
They said their dyno reads lower than others and that my car was running fine and not to worry about the dyno numbers
This cam has proven itself to be a very strong performer in many other combinations, I wouldn't worry about numbers too much unless the car doesn't trap the MPH it should at the track.
Then you may need to look at the tune or elsewhere to see if there is a restriction.
Then you may need to look at the tune or elsewhere to see if there is a restriction.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
