My wheelie...
#1
TECH Apprentice
Thread Starter
Join Date: Jun 2004
Location: Houston,TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've never been in a car that has done this, or driven a car that could. Now my car does it. It is kinda hard to make out, but you can tell. My friends said it was about 4-5 inches up. What really sucks is I fell victim to rice. It was on nitrous, gutted, and on slicks civic. I would have had him had I gotten the normal tree instead of instant green. He did have a fast car though. Anyways, thought I'd share my full weight camaro, cam only, pulling the wheels a little bit.
http://s23.yousendit.com/d.aspx?id=1...R0HAJKD7N836DQ
That link wont last long. If someone will, please host it.
Mods:
Moser 12 Bolt [4.11] and custom drive shaft
Custom Speed Demon Cam
Custom Speed Demon Tune
Custom Speed Demon True Duals
Ported and Polish Throttle-Body by Speed Demon
Jet-Hot Long Tube Headers
LS6 Intake
Stock everything suspension except subframes, panhard bar, and lower control arms. I can't wait to see how the car runs with full suspension with a custom Speed Demon torque arm.
BTW, my friend that grinded my calipers for me got to make a pass. He launched at 5500 and cut a 1.7, ran a 7.7. I launched at 5000 and cut a 1.8 and ran a 7.9. Now I know where to launch. Special thanks to Patrick and Smallwood for all their help.
http://s23.yousendit.com/d.aspx?id=1...R0HAJKD7N836DQ
That link wont last long. If someone will, please host it.
Mods:
Moser 12 Bolt [4.11] and custom drive shaft
Custom Speed Demon Cam
Custom Speed Demon Tune
Custom Speed Demon True Duals
Ported and Polish Throttle-Body by Speed Demon
Jet-Hot Long Tube Headers
LS6 Intake
Stock everything suspension except subframes, panhard bar, and lower control arms. I can't wait to see how the car runs with full suspension with a custom Speed Demon torque arm.
BTW, my friend that grinded my calipers for me got to make a pass. He launched at 5500 and cut a 1.7, ran a 7.7. I launched at 5000 and cut a 1.8 and ran a 7.9. Now I know where to launch. Special thanks to Patrick and Smallwood for all their help.
#5
TECH Senior Member
iTrader: (10)
Join Date: Nov 2001
Location: Gainesville, Denton TX
Posts: 8,766
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bauer.Brandon@gmail.com
BoogerB@***.net
I'll see what I can do for ya.
Dunno how long it will last, but it will help
BoogerB@***.net
I'll see what I can do for ya.
Dunno how long it will last, but it will help