PhillyLS1

iTrader: (3)

No big whoop, my first video. 1st run bogged a bit, 2nd was much better. Hope it's enjoyable for someone. http://videos.streetfire.net/video/F...0D6894C514.htm

ELMiN8oR

link no worky...

scottyballs

iTrader: (3)

It works you need to install the new flash player...

looked fun was that at PSI?

PhillyLS1

iTrader: (3)

Nah, at F-Body Central in Baltimore County

B18B1LS1

iTrader: (12)

That always makes me nervous, the loading and unloading of the straps betwen gears worries me. I've seen some high hp cars nearly leave the dyno doing it, maybe it's just the person strapping those cars. Cool video though, looks like fun!

Jeffrey

SSLS1

iTrader: (3)

how could that possibly be safe ripping it from a idle on the dyno, i personally would worry about the car jumping off

K I L O

iTrader: (5)

Looks like a rush!!!!!! wat were the #s?

PhillyLS1

iTrader: (3)

11.5 @ 120 (it's pretty accurate to my real times w/ a 1.7 60') Wait till I spray!

WS6WRX

iTrader: (1)

Sounds good man, nice talkin to ya at work.

unit213

Holy ****...that gives new meaning to "dyno racing."

That is some of the dumbest **** I've seen to date.

1BAD02WS6

iTrader: (-1)

you must be leaving a ton of **** out of your sig....plus there is no way you would ever launch that good on street tires at a track

PhillyLS1

iTrader: (3)

Yes I am leaving alot out of my sig. I'll update it when I get a chance. It is totally feasable to get a 1.5 60' on 245-50 16's I said the thing was close, not dead accurate. I run 28 inch slicks at the track. It's alot of fun, if you don't like it that's fine. It was more or less to test the dyno, it was brand new.

BuBbABFP

iTrader: (3)

lol, what about wind drag?

PhillyLS1

iTrader: (3)

We had the fan on! Jeeze just no pleas'n you guys LOL

scottyballs

iTrader: (3)

opinions are like ********, and there are alot of them on this site.. the newer dynos are built for 1/4 mile runs PSI also has one you can do 1/4mile runs on...

I cant wait to get my TH400 in so I can test out the transbreak on the dyno

BES Stroked Nova

iTrader: (24)

ohh ****, get that on vid!!

choppin-suey

iTrader: (6)

didnt your care just run a 11.5 with heads/cam/and a 75 shot and on slicks?(11.5 being the best of the day). I guess I know where not to take my car to when I want some work done, thanks!

PhillyLS1

iTrader: (3)

What does that have to do with the shop I get my car worked on at? I can't drive. That's what happens when you shift at 5,000 RPMS and leave at 3,000, on top of the small cam (222 duration) etc. All the decisions on the car were made by me, not the owner of the shop. So again it wasn't the shop.
But you probably can take your car to another shop around here, they like to dig up old threads and bash other shops to boost buisness. (Considering I posted this a while ago and went to the track last sunday) Not really a place where I'd wanna take my car, but to each thier own. Besides the place I take my car too had to stuff over 20 cars into thier shop tonight, So they're doing something right for people who can actually drive.

02WS6Bird

iTrader: (2)

I've done a dyno track run.... my t/a ran 13.9@108mph on it Spun the tires all the way through 1st. this is on a mustang dyno @ Outlaw Motorsports. My actual times are 12.8@107 1.9 60' so its fairly accurate

PhillyLS1

iTrader: (3)

Yeah I know. When I was kicking the crap out of my car on the dyno, it was almost the same way I drove at the track. AT THE TRACK I ran a 11.7 @ 119 (right after I had gotten back from Iraq) with little or no seat time.
This however is not a dyno debate. This is about mudslinging by a shop on another forum. They think the shop I take my car to cause me only to pick up only 2 tenths with a 75 shot. Well anybody with a brain can figure out that is due to poor driving/driver error/ or the driver not caring about his times cause it was a shake down run with only the second time he's piloted the car since Iraq and the 1st time ever running with nitrous.