New Pics! <check em out!>
Thread Starter
TECH Resident
iTrader: (8)
Joined: Dec 2004
Posts: 827
Likes: 1
From: Albuquerque, NM
New Pics! <check em out!> Took some new pics of the Z28, and with my bud in his 06 Stang GT. Let me know what you fellas think, the whistler mod is the newest addition.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by SSilverSSurfer
wheels look good howd you do them
Not hard at all cause I did them on my SOM Z/28 just have to have time and patience masking them off then I painted mine with black wheel specific paint, 3 coats then did 3 coats of wheel specific clear coat. Came out really well and just painted my drag wheels with the same stuff.
The car looks badass do you have a drop on it or are you still at stock height?
Thread Starter
TECH Resident
iTrader: (8)
Joined: Dec 2004
Posts: 827
Likes: 1
From: Albuquerque, NM
Originally Posted by RS_SS69
Not hard at all cause I did them on my SOM Z/28 just have to have time and patience masking them off then I painted mine with black wheel specific paint, 3 coats then did 3 coats of wheel specific clear coat. Came out really well and just painted my drag wheels with the same stuff.
The car looks badass do you have a drop on it or are you still at stock height?
The car looks badass do you have a drop on it or are you still at stock height?
And yes u need patience, make sure u mask the wheel off the best you can, use some 800 grit sandpaper and go over the areas your are going toi paint, clean them up real well and shoot some high temp wheel paint on there, a few coats, let them sit then throw some coats of high temp clear coat on there... i did not put any clear on mine, i will here soon though.