Good ol' oklhoma street racin'
#81
http://videos.streetfire.net/video/7...e10185d7b5.htm this was the 25th in dfw lots of fun those guys get an A+ bes place to race bar none
#86
Originally Posted by SPRAYED 01
I like how all these "street cars" were all on trailors.
well when you bring your ride down here to race we'll see if you dont trailor it!
like said before....traveling that far is ridiculous to not put it on trailor.
#94
12 Second Club
iTrader: (116)
Yea. It's sittin in my room along with my cam & springs.
Preston is Polishing my intake some more, I'm gettin a Polished catch can from Justin(SfrigginS) Saturday & Speed Inc. fuel rails on the 9th. I'm also gettin ChevyChad's in-line fuel pump since he is upgrading. All I'll need for my fuel system is a set of 42lb injectors.
Then of coarse I still need the following for my cam swap.
LS2 timing chain
Oil pump(goin Melling if Chads works for him)
Cam bolt & gasket kit
Hardened 7.4 pushrods
Money for Glenn to do the tune
Hopin for around 400 N/A & 500 on the juice.
Preston is Polishing my intake some more, I'm gettin a Polished catch can from Justin(SfrigginS) Saturday & Speed Inc. fuel rails on the 9th. I'm also gettin ChevyChad's in-line fuel pump since he is upgrading. All I'll need for my fuel system is a set of 42lb injectors.
Then of coarse I still need the following for my cam swap.
LS2 timing chain
Oil pump(goin Melling if Chads works for him)
Cam bolt & gasket kit
Hardened 7.4 pushrods
Money for Glenn to do the tune
Hopin for around 400 N/A & 500 on the juice.
#95
MASS seller approved
iTrader: (160)
Originally Posted by BIG_MIKE2005
Yea. It's sittin in my room along with my cam & springs.
Preston is Polishing my intake some more, I'm gettin a Polished catch can from Justin(SfrigginS) Saturday & Speed Inc. fuel rails on the 9th. I'm also gettin ChevyChad's in-line fuel pump since he is upgrading. All I'll need for my fuel system is a set of 42lb injectors.
Then of coarse I still need the following for my cam swap.
LS2 timing chain
Oil pump(goin Melling if Chads works for him)
Cam bolt & gasket kit
Hardened 7.4 pushrods
Money for Glenn to do the tune
Hopin for around 400 N/A & 500 on the juice.
Preston is Polishing my intake some more, I'm gettin a Polished catch can from Justin(SfrigginS) Saturday & Speed Inc. fuel rails on the 9th. I'm also gettin ChevyChad's in-line fuel pump since he is upgrading. All I'll need for my fuel system is a set of 42lb injectors.
Then of coarse I still need the following for my cam swap.
LS2 timing chain
Oil pump(goin Melling if Chads works for him)
Cam bolt & gasket kit
Hardened 7.4 pushrods
Money for Glenn to do the tune
Hopin for around 400 N/A & 500 on the juice.
hell ya eventually im hopeing for 500 na through an auto but that will probally be solid roller and my rings are gapped for at least a 400 direct port but that will be probally next year
#96
Sorry im late on this....But there are more vids like that and all the cars you seen in the vid from oklahoma are members of www.midweststreetcars.com register to see the good ****. We are always out lurkin around for some action in the okc area. We travel on a regular basis to other states to race. Oh and whoever said chi town and h-town and cali and all that crap are the "get down" states....GET A CLUE. That first vid had 2 of chi towns cars in it...going out early. And houston is a freakin joke....we went down there last month and they aint got ****. Hell the datsun cleaned up down there last year. Well anyways, if any of you are from around the okc area check it out...Lots of crazy stuff going on...We also have a 405 Kings Of The Street Top 10 List of the fastest street raced cars in the 405. You think you got what it takes? Call em out.....
#100
MASS seller approved
iTrader: (160)
i wish there were more bad *** 4 gens around here i mean there are a few but not 20-25 383,370,402,408,427's like in texas and bigger states but tulsa should beat most okc cars at the track like supersix,texanss,i mean tulsa has E.D.,scott,anthony soon and a few other stroker ls1's okc only has cliff's 427,andy's 408, and thats all i know about as far as big cubes because i was banned at ws6zxr but okc has some fast *** race cars