CRZYPWR idle
#1
12 Second Club
Thread Starter
Join Date: Feb 2005
Location: Gas Station
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
CRZYPWR idle
It is a cold start, after i fixed the MAP sensor, car seems to run little weird, dies out once. Needs retune. Enjoy!
http://www.youtube.com/watch?v=IXwKlAnRy6Y
Stock stall, stock motor, stock cam, some bolt ons run.
http://www.youtube.com/watch?v=JCOlkPDN1FM
Drag radials won't do it anymore. Horrible spin!
http://www.youtube.com/watch?v=VrzXCLaxAlE
http://www.youtube.com/watch?v=IXwKlAnRy6Y
Stock stall, stock motor, stock cam, some bolt ons run.
http://www.youtube.com/watch?v=JCOlkPDN1FM
Drag radials won't do it anymore. Horrible spin!
http://www.youtube.com/watch?v=VrzXCLaxAlE
Last edited by CRZYPWR; 01-26-2007 at 03:31 PM.
#2
TECH Fanatic
iTrader: (30)
Join Date: Aug 2005
Location: Northern VA
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
Did you warm them ***** up? They were spinning all the way down the track...
I see your 60 foot is 2.3 sec. You could be pulling a better time with the Nittos. You just have to warm them up for awhile. Do like a 15 second burnout and they should stick pretty well. They are not the best drag radial by far but they are capable of pulling 1.8 60's or so.
I see your 60 foot is 2.3 sec. You could be pulling a better time with the Nittos. You just have to warm them up for awhile. Do like a 15 second burnout and they should stick pretty well. They are not the best drag radial by far but they are capable of pulling 1.8 60's or so.
#5
12 Second Club
Thread Starter
Join Date: Feb 2005
Location: Gas Station
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Yea I live in IL suburbs. Schaumburg to be more exact.
Yup that was Byron!
Well I warmed them up, 4-5 sec at 5k rpm.
I only drive it from time to time during spring and summer time. I don't mind at all, I love it, cops and neighbors hate it!
They're 315/35/17, no side wall whatsoever. I put the pressure down to 17 psi as well.
Well, I got a new tires now, got the QA1s, and some suspension, BMR lower control arms, panhard rod, sway bar, here is couple of photos.
That should help next time Im out.
Yup that was Byron!
Well I warmed them up, 4-5 sec at 5k rpm.
I only drive it from time to time during spring and summer time. I don't mind at all, I love it, cops and neighbors hate it!
They're 315/35/17, no side wall whatsoever. I put the pressure down to 17 psi as well.
Well, I got a new tires now, got the QA1s, and some suspension, BMR lower control arms, panhard rod, sway bar, here is couple of photos.
That should help next time Im out.
Last edited by CRZYPWR; 01-27-2007 at 01:11 AM.