396D1SS

iTrader: (21)

hunter, that is one badass machine you have!!!

venom ws7

iTrader: (13)

Will you PLZ Stop saying that now I have to Quote you again
lol.

I watched those vids like 50 times
Still awesome.

FASTFATBOY

iTrader: (23)

I thought you had them on your car, what are you running Mike?


Come tune on my Hooptie a little so I can drive it.


David

R_trim 93GT

iTrader: (1)

Hunter02SS:

I know you said that you are running the stock 10 bolt, what gear are you running, 3.42's or 3.23's?

Thanks

Chris05ssTruck

iTrader: (9)

3.23's i think is what he told us

HUNTER02SS

iTrader: (24)

Yes,they are 3.23. My car was originally an auto then I converted to the 6 speed.

R_trim 93GT

iTrader: (1)

Thanks, Chris. I did some reading up and found another thread where he talks about shifting at 6500 and having the potential for atleast 150 in fourth.

chavez885

iTrader: (12)

Did i just read he is on stock 10 bolt? SICK races and amazing car,look forward to more videos.

SILVERZZ28

iTrader: (3)

Yeah for the track.

Bring it over

FASTFATBOY

iTrader: (23)

What you running on the ZR1 wheels? BFG's? Surely not Nitto's?

I MAY make Cruising the Coast....Waiting on the trans to come back from CPT, then off to Ed Wright. I need some timing pulled out. Detonates when the converter locks up.

SOB is LOUD aint it....I am getting too old for this stuff.


David

SILVERZZ28

iTrader: (3)

The ZR1s are actually empty right now. The car didnt sound that loud. It was glad to see another real street car riding around though. We can pull some timing out and move the lock-up. Ed likes it low which you can't do on that kind of setup. I have a few more tricks as well

FASTFATBOY

iTrader: (23)

Soon as I get the trans back in I will ring your bell. Should be next weekend I hope.


What wheels/tires do you have on the car for street driving? I hope these BFG's do ok on the street after it is all sorted out.
I have only stood on it twice, from 2nd gear they did good. 1st gear it is hunting a ditch LOL. 325/50 is the biggest tire I can fit, M&H could be an option.


Thanks Mike, I will call you.


David

Adam_346

Dude that was nothing short of Bad@ss! Hell Yeah.

HUNTER02SS

iTrader: (24)

I appreciate it guy's. I have to do some change's to make the drivetrain bulletproof.it is definatly a blast to drive!!

SuperZ

iTrader: (2)

Good runs man!!!It seems like 03/04 cobras never run as good as the power they make.Theres a few in my town that get beat by cars with up to 100 hp less.Nice Ownage on the stang

Speeds8erM-1

iTrader: (28)

Thats usually the case on most of the blower ones but the turbo setup is a little different, it doesnt have the air to water intercooler anymore so it doesnt get heat soaked as some of the blower setups which are just HEAT BOXES sitting on the motor.

Car has 804 RWHP, other car has 922 rwhp, they both had halfway decent traction, not sure what you expected?

gsrhunter

When I read the camaro was on nitto dr's...and then watched the vid and saw how well he hooked... I imediately said those cars aren't making that much power or they aren't on full kill. Then I read all the posts. Wow... I seriously would have bet my left nut that those dr's wouldn't hold that much power from anything less than an 80mph roll. Even then I would be skeptical!!! That is truly amazing. Nice vid!!!

HUNTER02SS

iTrader: (24)

They were betting that I wouldn't of hooked as well also.For some reason they hook pretty good. They were hazing the whole time but it was gripping good enough.

gsrhunter

This isn't a flame... because as you can see I am the last person who can flame someone on this subject.... but you make 922rwhp and are only running 10's.... please explain!!!

Speeds8erM-1

iTrader: (28)

????????????? READ STOCK 10 BOLT, 6 Speed, Nittos, stock LCA's, stock Panhard Rod and as he already said his passes were with the auto on a bit less boost. You dont build a 922 rwhp 6 speed car and just RUN the numbers at the track automatically. It's gonna take some work and time.