SAM's 99 Camaro SS went 8.75 @ 153 All-Motor yesterday
#22
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Sep 2003
Posts: 10,591
Likes: 0
From: Houston
No problem...
C5R based block and cylinder heads. We do all of our machine work and Porting/dynoing/tuning in house by ourselves (Staff and Students) Basically at our school, motors like this are our homework.
It is a 427" motor. 4.125" Bore and 4.00" Stroke.
15.5:1 Compression
Dry Sumped
Cam is in the 28X/29X area @ .050. Total lift is in the .900's
Other then that, it is your average 9XX horsepower LSX based motor.
#23
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Sep 2003
Posts: 10,591
Likes: 0
From: Houston
www.SAMracing.com You can request a packet for free and really take a look at it.
And you are close. This thing is pulling right over 9K. Nothing like the sound of a ton of RPM and a 4 speed.