EPP cam @ idle
05-27-2008, 10:33 PM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Syracuse, NY
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
EPP cam @ idle Someone had asked me for an idle video, so they could hear the EPP cam on a stock cubed motor.
I figure i would post it for everyone.
Setup is:
2001 factory LS6 block trans am
317 heads with dual springs
EPP cam
D1 procharger
Pacesetter LT
Pacesetter ORY
Borla adjustable catback with electric cut out
http://s302.photobucket.com/albums/n...6/Idle%20Video
There's a video of it both open and closed... Extremely happy i went with the electric cutout, sure beats having to change out the plates!!!
**ohh and i just noticed the exhaust tip on the pass. side is off, gotta fix that
***
Any and all comments are welcome.
Thanks...
--Mike
I figure i would post it for everyone.
Setup is:
2001 factory LS6 block trans am
317 heads with dual springs
EPP cam
D1 procharger
Pacesetter LT
Pacesetter ORY
Borla adjustable catback with electric cut out
http://s302.photobucket.com/albums/n...6/Idle%20Video
There's a video of it both open and closed... Extremely happy i went with the electric cutout, sure beats having to change out the plates!!!
**ohh and i just noticed the exhaust tip on the pass. side is off, gotta fix that
***Any and all comments are welcome.
Thanks...
--Mike
Last edited by dcvingv6; 05-27-2008 at 10:46 PM.
05-28-2008, 12:42 PM
#6
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Syracuse, NY
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Drivability is great actually, idles 8-900rpm, no cam surge or anything, i can even drive in 5th gear @ 45mph with no problems (stock 3.42 gears). No complaints about it all!
Thanks...
--Mike
Thanks...
--Mike
sounds awesome!