Negative Trader Feedback Disputes| Fraud Reports | Scam Warnings

User "SAPPER" sold me a warped pressure plate

Thread Tools
 
Search this Thread
 
Old 09-14-2017, 10:46 AM
  #1  
Teching In
Thread Starter
 
Tarvisse's Avatar
 
Join Date: Mar 2016
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default User "SAPPER" sold me a warped pressure plate

A few months back I purchased a used Monster stage 2 clutch disk and pressure plate from SAPPER, who stated the unit had 800 daily driven street miles and that they were both in good condition.

After receiving the items and having them looked at by a professional I was told the disk had about 1-2k miles left on it and that the pressure plate was warped.

A proper waste of 250 dollars, what I was sold is literally trash and has no use whatsoever.
Old 09-14-2017, 12:57 PM
  #2  
10 Second Club
iTrader: (11)
 
Zmg00camaross's Avatar
 
Join Date: Jun 2009
Location: Missouri
Posts: 5,046
Received 47 Likes on 41 Posts

Default

Hmmm any pics? I don't understand how someone can estimate how much life or miles a disk has left.
Old 09-14-2017, 01:20 PM
  #3  
Teching In
Thread Starter
 
Tarvisse's Avatar
 
Join Date: Mar 2016
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm pretty sure the life of a clutch disk is judged by the proximity of rivets to the pad material. I dont know much but I know that.
Old 09-14-2017, 02:09 PM
  #4  
10 Second Club
iTrader: (11)
 
Zmg00camaross's Avatar
 
Join Date: Jun 2009
Location: Missouri
Posts: 5,046
Received 47 Likes on 41 Posts

Default

Is a fair amount of hot spots.
Old 10-01-2017, 01:57 PM
  #5  
TECH Apprentice
iTrader: (27)
 
laurentj23's Avatar
 
Join Date: Sep 2014
Posts: 300
Likes: 0
Received 1 Like on 1 Post
Default

had it happened to me as well. ended up getting a new one. Learnt my lesson and don't ever buy a used clutch on here..even if they claim it is a low mile.
Old 10-01-2017, 03:15 PM
  #6  
Launching!
iTrader: (5)
 
sabastian458's Avatar
 
Join Date: Jun 2009
Location: Upstate, SC
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts

Default

I had the same concern years ago with my monster stage 3 disks and bought another clutch. After I bought, I had an indepth conversation with Steve at monster, and come to find out the disk I had still had aprox 80% life left in it. With the type of material and such used, the older "its close to the rivets" guessing doesn't work. You have to actually use a caliper/micrometer to measure the precise thickness to determine its remaining life.
Old 05-05-2018, 07:23 AM
  #7  
TECH Fanatic
iTrader: (10)
 
SAPPER's Avatar
 
Join Date: May 2004
Location: Halfway back on the Highway to Hell...again!
Posts: 1,572
Received 240 Likes on 170 Posts

Default

And I'll rebutt this now that I see it. Clutch worked perfect when I took it out. Also it did have very low miles. It was in a AutoX car and had some drag pulls on it. Right before it was taken out, it had no problem cutting a 1.6 60' on a stock LS1.

But then you try to file a claim over 9 months later??? Really??



Quick Reply: User "SAPPER" sold me a warped pressure plate



All times are GMT -5. The time now is 11:14 AM.