I think VTESPEED is trying to Screw me
01-31-2006, 06:11 PM
#62
11 Second Club
iTrader: (1)
Join Date: Jan 2004
Location: Bakersfield, Ca
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kpowr82
I was just about to post on this as well, basically calling BS on Sledz28. I'm glad I didn't, cause that thread was a different intake from the same seller with a different buyer. Apparantely VTESPEED deleted the original thread for some reason, not quite sure why, but that in itself gives me reason to believe he is in the wrong.
From the sounds of the other thread those two have going on this, it's being resolved. Sorry if my comments are out of place, just my .02
From the sounds of the other thread those two have going on this, it's being resolved. Sorry if my comments are out of place, just my .02
Also the LSX90 post that SLED28 bought clearly said the same.
I really wonder how he didnt understand what he was getting from the way I read it. Also I noticed vtespeed recieved a couple more positive seller feedbacks since this stuff started. So he has like 11 positives and this one negative where it really looks like he didnt do anything wrong but sell a fiberglassed intake and the buyer didnt read over the post very well.
Also with the tranny, from the look of whats all posted. There is no proof or anything showing that vtespeed didn't ship it on time like he said he did. and then after it had some damage from fedex, he paid out of pocket and made it right for the buyer. So what did he do wrong?
How come we arent praising sellers like this and instead of bashing them for making things right? It even seems he is going above/beyond taking intake back from SLED28 now.
Man it just looks like vetspeed is getting a bum rap without much cause.
01-31-2006, 10:52 PM
#63
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Grand Prairie tx
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dragon93308
Also with the tranny, from the look of whats all posted. There is no proof or anything showing that vtespeed didn't ship it on time like he said he did. and then after it had some damage from fedex, he paid out of pocket and made it right for the buyer. So what did he do wrong?
02-01-2006, 12:45 AM
#64
You gotta be shitting me.... this is Voyles at it again? He's got a bad rep on the corvetteforum for sure...
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
I knew that name sounded familiar... a search of the archives proved my memory was correct
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
I knew that name sounded familiar... a search of the archives proved my memory was correct
02-01-2006, 01:43 AM
#65
Banned
iTrader: (12)
Join Date: Jun 2004
Location: So Cal, CA
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Theres not a person in this world that can say 1st person that I didnt take care of the problem, or that I owe them money in anyway.
All that stuff is 2nd/3rd hand. I have hundreds of positive feedback from ebay and zero unresolved sales on here.
You are welcome to contact any buyer you listed and youll not find one person that hasn't been taken care of to mutual agreement.
I actually had 87 positive sales on that message board and one negative that caused all that bandwagon posting because a guys shipment got lost by fedex and then was fully refunded/paid for by the insurance placed on it.
<This is my last post in this topic period>...
All that stuff is 2nd/3rd hand. I have hundreds of positive feedback from ebay and zero unresolved sales on here.
You are welcome to contact any buyer you listed and youll not find one person that hasn't been taken care of to mutual agreement.
I actually had 87 positive sales on that message board and one negative that caused all that bandwagon posting because a guys shipment got lost by fedex and then was fully refunded/paid for by the insurance placed on it.
<This is my last post in this topic period>...
Last edited by VTESPEED; 02-01-2006 at 01:52 AM.
02-01-2006, 05:02 AM
#66
TECH Veteran
Originally Posted by dragon93308
If it was deleted, could the admin bring it back?
https://ls1tech.com/forums/lsx-parts-sale/417684-fs-lsx-90mm-intake.html
https://ls1tech.com/forums/lsx-parts-sale/442066-fs-lsx-90mm-intake.html
(Also found https://ls1tech.com/forums/negative-trader-feedback/444822-fast-90mm-intake.html )
Originally Posted by Big Daddy
The beginning of the transaction was a little shaky, Says it was going to ship fedex, then he went with usps and it didnt meet weight requirement, so it sat on there dock for about a week. No shipping number at the beginning after many PMs. He did take care of it and my money looks to be refunding back. So I am good to go now.
I don't see any conclusion to the SLED28 situation yet, though...?
02-01-2006, 07:43 AM
#67
FormerVendor
iTrader: (7)
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
I will be sending the intake back first, then he will pay me once he receives it. Kinda bogus if you ask me.
Last edited by SLED28; 02-01-2006 at 07:55 AM.
02-01-2006, 07:49 AM
#69
FormerVendor
iTrader: (7)
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
As soon as I got the intake and opened it, I sent this PM IMMEDIATLY to VTE!! Also I paid on 5/12/05, 6 weeks prior !!!!
Originally Posted by SLED28
Originally Posted by SLED28 on 1/21/06
I just received the intake... Big problems! The back is all welded? It is no longer a 2 piece intake and I can see pin holes when I put it up to light and look through it.
This is not acceptable and frankly need a full refund,
sorry
Dave
I just received the intake... Big problems! The back is all welded? It is no longer a 2 piece intake and I can see pin holes when I put it up to light and look through it.
This is not acceptable and frankly need a full refund,
sorry
Dave
02-01-2006, 09:51 AM
#75
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Grand Prairie tx
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CHarris
You gotta be shitting me.... this is Voyles at it again? He's got a bad rep on the corvetteforum for sure...
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
I knew that name sounded familiar... a search of the archives proved my memory was correct
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
http://forums.corvetteforum.com/show...m_id=55&arch=1
I knew that name sounded familiar... a search of the archives proved my memory was correct
02-01-2006, 09:55 AM
#76
LS1Tech Co-Founder
iTrader: (34)
Last time I saw an intake epoxied like that, it was repaired because the back blew out from a nitrous backfire. They can be fixed but I would want to see pics of an intake that looks like that.
FWIW my current LS6 intake has epoxy for some holes, but it's holding up to 21psi. But I would disclose that if I sold it.
FWIW my current LS6 intake has epoxy for some holes, but it's holding up to 21psi. But I would disclose that if I sold it.
02-01-2006, 09:58 AM
#77
Why would you open up the back of it to port it, when its a 3 peice intake? That would be the first sign of not buying it. That patch job he done, well it looks like crap. I cant blame you one bit for wanting your money back , but in the description that you took a pic of it does say he opend it up in the back. Dont know if that counts or not.
02-01-2006, 10:11 AM
#78
Banned
iTrader: (12)
Join Date: Jun 2004
Location: So Cal, CA
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Well I thought I disclosed it in my description as best that I could without making it sound like it was "unuseable". I have ran the intake since it was fiberglassed and it worked perfect with no problems. I disclosed that the back was redone in the description. I didnt have any pictures of it, and noone asked for any. So I really dont think I should be slammed like I attempted to mislead.
ALSO SLED28 reposted it for sale with less of a description than I did. Was he attempting to mislead people? I mean he posted it with this description
When i sold it to SLED28 heres the description I had
Now whos the one that was honest on the description?
ALSO SLED28 reposted it for sale with less of a description than I did. Was he attempting to mislead people? I mean he posted it with this description
Originally Posted by SLED28
Bought from another member and did not like the repair job on the back so I am selling it for $500+ shipping. It came off a running car
Originally Posted by VTESPEED
It was only on the car about 6 months. I opened it up on the back and did some minor home porting on it and to pick up a few horsepower from some tips on ls1tech. back custom fiberglass redone with factory ls1 intake map sensor setup (great little upgrade, I cant stand the non clip in map sensor) no difference really but couldnt hurt i figured.
$525 shipped. Payment by moneyorder, cashiers, personal check, paypal etc
Check my ls1tech feedback thanks!"
$525 shipped. Payment by moneyorder, cashiers, personal check, paypal etc
Check my ls1tech feedback thanks!"