TA_BUD

iTrader: (4)

my first post, was wondering if anyone bought a ford 9", modify it to bolt in a 2000 ta (what type of car and year) thanks for any help

black2000ss

iTrader: (6)

Questions like this come up all the time. Your best bet will be to buy a Moser 9" or a 12 bolt already made for an f-body. Making a ford 9" fit would be difficult and expensive. I've never heard of anyone doing it.

95 Z28

iTrader: (21)

Not everyone has 2800 for a complete, new rearend. There are guys out there that get junkyard rear ends/center sections and put them into a housing that EPP sells. It's a good alternative.

9000th01ss

iTrader: (10)

Not everyone has $1000 laying around either. I can't tell you how many questions I've seen where guys have a local yard that sells rears for $50 no matter what it is. And they think for $100 total they've got an f body 9"
Most people think I'm an ******* now because I went through every reason why it won't work and they get all pissed off at me.

sgm98ws6

iTrader: (8)

Honestly if it was as easy as buying any old 9" and throwing it in a fbody with minimal welding/cutting everyone would have done it already.

TA_BUD

iTrader: (4)

i thought i could cut old brackets off and weld them back on to a different rearend, surely someone has tried?

Daryn

iTrader: (19)

i did mine for 700 dollars that includes the moser spool, axles, axle flanges, chunk, 4.11 gears, setup kit, and everything.

if you want to buy it i can put a moser sticker on it and sell it to you for 2800


if you know anyone that got a old 9'' laying around id be more than happy to get it off your hands.


its not that hard. just because the bolt holes dont line up dont mean it wont work.

Dave 96TA

iTrader: (10)

Those who can do it - do it. Those who cannot (including me) post questions about it. If it were that easy to do, there wouldn't be questions about it. It takes skills, knowledge and tools. If you're short on any aspect, better to just buy a finished one.

lkn2run

who is epp? I have a 9" center section posi and axles.I can have axles shortened and resplined for$100,but where do I get a housing and the torque arm bracket from?

LS1crazy01

iTrader: (14)

EPP is a sponser on here, I would suggest calling Eric at Midwest Chassis he is also a sponsor. He has the best pricing and products in my opinion.
I too Looked into this as well and it was not worth it to me. Good luck!

9000th01ss

iTrader: (10)

Thats about the best thing I've read in a while.
Very true.