camaroboy14

iTrader: (8)

Hey guys I wanted to know would the stock length for the rods work fine? Are is there a suggested length ...the mods that will be done ms4 cam 4k stall prc dual springs. Thanks just want to know what lenght to get ....

jsteele90

iTrader: (13)

only way to be 100 percent is to use a pushrod length checker

camaroboy14

iTrader: (8)

sorry ..I AM new at this...how would I do that? Or u think I can call tsp maybe they wil know the length ?

jsteele90

iTrader: (13)

tsp should know. but the pushrod length tool is sold by comp cams and a few other companies as well

Jon@Texas-Speed

iTrader: (18)

On stock heads, we normally go with a 7.425" pushrod. Like mentioned above, the only way to know for certain w/ your setup is to measure. The Comp PR length checker is an easy to use tool that will make sure you have what you need. They are $19.99 from us. Let me know if you need one and we'll get you fixed up!

Jon