Having problem
Thread Starter
On The Tree
Joined: Mar 2003
Posts: 130
Likes: 0
From: Houston
Having problem I just got some new bfg drags and went to the track.I was stalling at about 4,000 rpm and still boging.I didn't want to go any higher because it idn't want to break anything.I wanted to see how I can leave the hole with out boging.
I did manage a 1.97 60' but i know i can hit better.Any help on this.
I did manage a 1.97 60' but i know i can hit better.Any help on this.
Thread Starter
On The Tree
Joined: Mar 2003
Posts: 130
Likes: 0
From: Houston
Problems
Originally Posted by holsingerjm
Is it bogging right off the line or after you have let completely off the clutch?
Launching!
Joined: Apr 2004
Posts: 229
Likes: 0
From: Albany, GA (IL Resident)
Originally Posted by 2_wacko
You need a aftermarket clutch to transfer the power more to the ground and give you a better launch. But then you might need a new rear end if your BFG's hook.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
On The Tree
Joined: Mar 2003
Posts: 130
Likes: 0
From: Houston
Originally Posted by 2_wacko
Try riding the clutch a little off the line or try not reving at such a high rpm,
I'LL SEE HOW IT GOES
