Right turn signal doesn't work
#1
Registered User
Thread Starter
Join Date: Apr 2015
Location: Lubbock, TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hello all. I'm having problems with my right turn signal. It won't flash on the dash or signal but when I use the emergency lights the bulbs are all good. The left turn signal works perfectly. Anyone know what it could be? Any help is appreciated. Thanks.
#3
11 Second Club
iTrader: (3)
Join Date: Apr 2014
Location: St Louis, MO.
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pull your right taillight off and then turn the blinker on. I bet it's just the bulb. Mine worked with the flashers on, but the blinker bulb wasn't lighting up when I turned it on. Should be the problem
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also check the socket inside the turn signal housing. Neither of my turn signals worked. One side just needed the socket terminal cleaned with a pencil eraser and it worked fine. The other side was completely corroded so i had to replace the entire socket, but they're around $8 at Autozone, etc.
Post back when you resolve the problem so others can learn from the solution you find.
Post back when you resolve the problem so others can learn from the solution you find.
Last edited by JT2000WS6; 05-19-2015 at 07:44 AM. Reason: Edited for spelling.
#6
Teching In
Join Date: Nov 2012
Location: Greenville, SC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just had this issue a few weeks ago. It's your flasher relay. Cost a few dollars at advance auto. Under the steering column panel. It's a plastic cylinder with prongs on it. Takes maybe two minutes to replace.