BaD AZz Z28

iTrader: (2)

The 02 LS1 cam position sensor part number is 12561211, I believe the last one listed was 12561311. Typo?

khaos288

iTrader: (9)

the rh sensor that mounts at the front of the head

its circular and three flat prongs

LB181

I am swapping a 04 Vortec engine into my 51 Chevy pickup. Sorry not an actual LS1 question. I searched an it appears that the outer dimensions of the engines are the same, and there are a few differences, but does anyone know if the bellhousing to engine bolts and flexplate bolts are going to interchange with the 01-02 LS1?

Any help would be appreciated. I already went to two dealers, and I dealt with idiots both times. Sucks that these days you can never find an old mechanic/parts guy that knows his stuff. These computer jockies can't grasp why you would want to swap an engine. Someone please help.

Thanks
Corey

torlak_t

i need a part number for the motor mounts for a 98 ss.???

Sartobuilt

iTrader: (2)

Rubber boot on the backing plate for the e-brake lever.

I hope that explains it.

Thanks

Greg

burnrubr88

iTrader: (2)

what's the part number's for driver and passenger side front turn signal housings? I see that the bulb and socket are on the list but not the housing.

LadyInRed

4l60e transmission dipstick tube 2000 camaro??

MrEddie

10-bolt differential cover & the 10 bolts.

Thanks!

peterock98

iTrader: (25)

Do you have the part # for a lower shift boot I install a pro 5.0 and cut it to much.
http://www.projecttransam.com/Projec...0/MVC-005F.jpg

LS1MONSTER

iTrader: (1)

I probably missed it..but does anyone have the part numbers for the "grey" interior sun visors for the 1998 Camaro. Driver and pass #'s please.

MyTA99

does anybody know what springs this part# goes with. 22077195
I got this part # off of some front spring and shocks. Just wondering if they are anything special.

C Murda

iTrader: (24)

no air truck manifolds part number please! thank you

JasonWW

iTrader: (2)

There are at least 2. One is deeper to allow room for the reluctor wheel on the non-TCS cars. If you have a traction control car you have the 2 reluctor wheels on the axles (4 channel), so either rear cover will work. Just don't try and fit a 4 channel rear cover to a 3 channel car. It won't fit.

Also, has anyone seen the engine covers for the 2005 Gran Prix GXP? They have the 5.3 V8 and a wicked looking one piece cover. Much nicer than the vette and GTO covers plus it should fit on the F-body car with minimal trimming in the rear. If anyone knows the part number let me know, I haven't found out much about them.

shovelhead73

Does anyone know the part number for the oil bypass adapter located above the oil filter. The LS2 motor I bought doesn't have this fitting. I need it for my oil pressure gauge. thanks

Paul Bell

iTrader: (9)

I'm installing a WS6 Ram Air hood on my '94 Formula. My dealer can't come up with the under hood insulation pad part number, search STILL ain't working and I've just looked through all 13 pages of posts in this thread. No mention of any Ram Air pads.

The dealer's only showing for non-WS6 hoods.

Any numbers, even if it's dead?

THANKS!

cammed01

Do you have part numbers for sun visors for 01 camaro

jman0322

iTrader: (6)

I need the part number for the lower air box assembly for ram air...thanks

Bad Blue WS6

iTrader: (41)

heres one

how bout the pins in our 2, 10, pin connectors behind our stereos for our wireing harness?

LankyLS-1

iTrader: (1)

Part number for driver's side a-pillar trim... 2002 ebony interior - t-top car.

99WS-6

Looking for the front driver side blinker parking light socet. the part the bulb plugs into and then twists into the lense. i have gone to 4 differant places local and none of wich carried. one of them had a circle socet that matched the part number but my car doesnt have a circle bulb it has a push in please any answer to this would be great driven with no blinker really isnt safe ty4m