turbonatormr2

I have a 2000 V-6 Chevey Camero. I changed all of the 3 coils, new spark plugs gaped at .060 and new spark plug wires the car wont stay on now. I dont know if I put the wires back on correctly on the coils or if I did something else wrong. When you open up the hood you have 3 set of spark plugs to the left and 3 to the right. Does anybody know where the spark plug wires would go to the coils to match the spark plugs.

Please advice

Tainted

iTrader: (9)

i dont think it matters but i could be wrong

turbonatormr2

Mmmmm! Iwonder why it's not staying on then. It was working fine until I changed the coils. Also When I removed the coils I removed the braket they are sitting on the back of the braket it has a little screw with a connector to the braket I removed the little screw to be able to remove the braket and the coils attaced to it. Then I removed the three coils then put on the three new ones on.

Tainted

iTrader: (9)

dunno much about that kinda stuff but i just kinda assumed the coils wouldnt matter. did the plug wires and coils have any numbers on them or anything like that?

2001NBMZ28

Not familiar with the V6 - the little screw with a connector wasn't a ground wire was it?