First Modifications for the future
#1
Staging Lane
Thread Starter
Join Date: Nov 2006
Location: Osnabrück/Dresden Germany
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
First Modifications for the future
Hi everybody
Next year i would slowly beginn with first mods.
Here the parts that i would have: SLP-Flowpackage,LS6-Intake,Magnaflow-Catback,Transmissioncooler and Hypertech-Programmer,SS or WS6-Wheels
What do you think about this first mods?
What is your opinion how much Power i will get with this parts?
Later i will make the handling and brakes
I m not sure to get all this parts next year,but so is my plan for the first
Next year i would slowly beginn with first mods.
Here the parts that i would have: SLP-Flowpackage,LS6-Intake,Magnaflow-Catback,Transmissioncooler and Hypertech-Programmer,SS or WS6-Wheels
What do you think about this first mods?
What is your opinion how much Power i will get with this parts?
Later i will make the handling and brakes
I m not sure to get all this parts next year,but so is my plan for the first
#2
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,362
Likes: 0
Received 1,794 Likes
on
1,278 Posts
Don't waste a lot of money on the hypertech programmer. Yes, I know I have one too for my stock car but I got it for next to nothing and all I wanted to do was change fan settings and shift points so it made sense for me. But their power tuning is useless and for the price they charge for a brand new HPP, your money would be much better spent on getting a custom tune.
Either way, I'd scrap that whole list you've got there and make my first mod a Procharger @5psi. J/K!
Either way, I'd scrap that whole list you've got there and make my first mod a Procharger @5psi. J/K!
#5
TECH Addict
iTrader: (19)
Join Date: Mar 2006
Location: Owings, Md
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
Ok, ls6 intake and magnaflow are fine. SLP sucks and is way overpriced for the most part. Just start with your basic bolt ons. Get a lid and headers along with that and it will be a good start. Get rid of your egr and emissions crap. At some point get a ported throttle body (or do it yourself) and an underdrive pulley. Throw on some subframe connectors and lower control arms and have fun.
#6
Subframe connectors should be your first mod on any f-body. I hate seeing a clean f-body only to gag when I see those autrocious door gaps.
They really stiffen up the car and stop alot of squeaks and leaks if you have t-tops.
Luke
They really stiffen up the car and stop alot of squeaks and leaks if you have t-tops.
Luke
Trending Topics
#9
TECH Resident
iTrader: (3)
Join Date: Aug 2005
Location: SW H-Town
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
LS6 Intake, headers, or just a converter. since you drive an A4, a converter is perfect. you wont gain HP, but you will get a better ET. my car is next to stock. all i have done to mine is slp lid, pacesetters, full exhaust, cutout, !cats, !egr, !air, stage 2 tranny, with no tune. it kinda runs like crap cuz it hasnt been tuned . but it sounds badazz. hopefully i can get some extra money in the next few weeks so i can get it tuned.
#10
LS1TECH Sponsor
iTrader: (1)
Join Date: Nov 2006
Location: Toms River
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by landstuhltaylor
dont waste your money on slp
edit:you could buy a lid from them, but thats about it.
edit:you could buy a lid from them, but thats about it.
My name is Hank Daniecki and I am the new Director of Engineering at SLP Performance Parts. I am intimately familiar with ALL SLP parts as I have worked for SLP as an engineer for the last 6 years. SLP's engineering department will be taking a much more active role on LS1Tech and many other boards on the web to help clear up any issues or problems that anyone might have with any and all SLP products. There are many rumors and false claims being made that we want to clear up as soon as they are spotted on LS1 tech. The SLP Engineering Department loves input from customers and the challenge to make our customers as happy as humanly possible. We take our jobs very seriously. We do not like to see members bash our products that we spend long days and nights designing without solid ground to stand on. The SLP Engineering Department and I welcome with open arms constructive criticism and factual replies. I will make sure all questions are answered with great detail. Any and all on the board, please do not hesitate to email me with any issues or problems you might have. Please include in your email a phone number so that we can communicate by phone if needed. I look forward to getting SLP a better reputation on this board. Our products are top notch and we take the greatest pride in the work that we do. Please take the time to check out our website and our new 100pg catalog; I am sure you will agree our products are top notch. Also, we have re-opened the SLP Installation and Dyno Center. Please find the link below.
http://www.slponline.com/20061006_install_dyno.asp
Thank You.
Hank
__________________
Hank Daniecki
Director of Engineering
SLP Performance Parts
www.SLPonline.com
#11
TECH Fanatic
iTrader: (11)
Join Date: Apr 2006
Location: Woodridge, IL
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SLPPower
landstuhltaylorand fellow LS1Tech users,
My name is Hank Daniecki and I am the new Director of Engineering at SLP Performance Parts. I am intimately familiar with ALL SLP parts as I have worked for SLP as an engineer for the last 6 years. SLP's engineering department will be taking a much more active role on LS1Tech and many other boards on the web to help clear up any issues or problems that anyone might have with any and all SLP products. There are many rumors and false claims being made that we want to clear up as soon as they are spotted on LS1 tech. The SLP Engineering Department loves input from customers and the challenge to make our customers as happy as humanly possible. We take our jobs very seriously. We do not like to see members bash our products that we spend long days and nights designing without solid ground to stand on. The SLP Engineering Department and I welcome with open arms constructive criticism and factual replies. I will make sure all questions are answered with great detail. Any and all on the board, please do not hesitate to email me with any issues or problems you might have. Please include in your email a phone number so that we can communicate by phone if needed. I look forward to getting SLP a better reputation on this board. Our products are top notch and we take the greatest pride in the work that we do. Please take the time to check out our website and our new 100pg catalog; I am sure you will agree our products are top notch. Also, we have re-opened the SLP Installation and Dyno Center. Please find the link below.
http://www.slponline.com/20061006_install_dyno.asp
Thank You.
Hank
__________________
Hank Daniecki
Director of Engineering
SLP Performance Parts
www.SLPonline.com
My name is Hank Daniecki and I am the new Director of Engineering at SLP Performance Parts. I am intimately familiar with ALL SLP parts as I have worked for SLP as an engineer for the last 6 years. SLP's engineering department will be taking a much more active role on LS1Tech and many other boards on the web to help clear up any issues or problems that anyone might have with any and all SLP products. There are many rumors and false claims being made that we want to clear up as soon as they are spotted on LS1 tech. The SLP Engineering Department loves input from customers and the challenge to make our customers as happy as humanly possible. We take our jobs very seriously. We do not like to see members bash our products that we spend long days and nights designing without solid ground to stand on. The SLP Engineering Department and I welcome with open arms constructive criticism and factual replies. I will make sure all questions are answered with great detail. Any and all on the board, please do not hesitate to email me with any issues or problems you might have. Please include in your email a phone number so that we can communicate by phone if needed. I look forward to getting SLP a better reputation on this board. Our products are top notch and we take the greatest pride in the work that we do. Please take the time to check out our website and our new 100pg catalog; I am sure you will agree our products are top notch. Also, we have re-opened the SLP Installation and Dyno Center. Please find the link below.
http://www.slponline.com/20061006_install_dyno.asp
Thank You.
Hank
__________________
Hank Daniecki
Director of Engineering
SLP Performance Parts
www.SLPonline.com
Awesome to see a sponsor in here looking to make an impact with customers. If this is the new attitude with SLP I'm going to be dealing with them in the near future.
#12
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Chesapeake, VA
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Hank,
I'm glad to see SLP getting involved with the message boards. I know that you guys take a lot of criticism on here, but some it has merit. I will say that the SLP airlid (it's my third different brand) is a quality piece, but that's all I have to go on... Good luck!
I'm glad to see SLP getting involved with the message boards. I know that you guys take a lot of criticism on here, but some it has merit. I will say that the SLP airlid (it's my third different brand) is a quality piece, but that's all I have to go on... Good luck!
#13
LS1TECH Sponsor
iTrader: (1)
Join Date: Nov 2006
Location: Toms River
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Benjamin Russick
Hank,
I'm glad to see SLP getting involved with the message boards. I know that you guys take a lot of criticism on here, but some it has merit. I will say that the SLP airlid (it's my third different brand) is a quality piece, but that's all I have to go on... Good luck!
I'm glad to see SLP getting involved with the message boards. I know that you guys take a lot of criticism on here, but some it has merit. I will say that the SLP airlid (it's my third different brand) is a quality piece, but that's all I have to go on... Good luck!
I will look for the merit, and if I do not find it I want to know about it. We have the tools and the ability to make the changes to products if necessary. Please use me and my department to your advantage. Obviously I can not search back years of posts on this site, so if I miss something please let me know.
Also, Myself and our IT department have been working very hard on a "New Products Coming Soon" page that will be up in the next couple of weeks. It will contain detailed photos and videos of all our new products that will be out in the next few months. This page will also show release dates of the products so you our customers can plan accordingly. I will hopefully post the link to this new page before X-Mas.
Thanks
Hank
#15
11 Second Club
iTrader: (36)
Performance Mods in order
1. free mods, oil change, tranny cooler
2. lid/filter
3. port your own throttle body
4. catback and/ or cut out
5. subframe connectors
6. Stall converter
7. Drag radials
8. LT headers ORY
9. Dyno tune/ LS6 intake
10. Other suspension components
11. Heads and Cam/ tune
12. spray/ retune
1. free mods, oil change, tranny cooler
2. lid/filter
3. port your own throttle body
4. catback and/ or cut out
5. subframe connectors
6. Stall converter
7. Drag radials
8. LT headers ORY
9. Dyno tune/ LS6 intake
10. Other suspension components
11. Heads and Cam/ tune
12. spray/ retune
#16
TECH Regular
iTrader: (3)
Join Date: Mar 2004
Location: VA. Beach/Monterey, CA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
i bet ya'll didn't see that one coming.
Originally Posted by SLPPower
landstuhltaylorand fellow LS1Tech users,
My name is Hank Daniecki and I am the new Director of Engineering at SLP Performance Parts. I am intimately familiar with ALL SLP parts as I have worked for SLP as an engineer for the last 6 years. SLP's engineering department will be taking a much more active role on LS1Tech and many other boards on the web to help clear up any issues or problems that anyone might have with any and all SLP products. There are many rumors and false claims being made that we want to clear up as soon as they are spotted on LS1 tech. The SLP Engineering Department loves input from customers and the challenge to make our customers as happy as humanly possible. We take our jobs very seriously. We do not like to see members bash our products that we spend long days and nights designing without solid ground to stand on. The SLP Engineering Department and I welcome with open arms constructive criticism and factual replies. I will make sure all questions are answered with great detail. Any and all on the board, please do not hesitate to email me with any issues or problems you might have. Please include in your email a phone number so that we can communicate by phone if needed. I look forward to getting SLP a better reputation on this board. Our products are top notch and we take the greatest pride in the work that we do. Please take the time to check out our website and our new 100pg catalog; I am sure you will agree our products are top notch. Also, we have re-opened the SLP Installation and Dyno Center. Please find the link below.
http://www.slponline.com/20061006_install_dyno.asp
Thank You.
Hank
__________________
Hank Daniecki
Director of Engineering
SLP Performance Parts
www.SLPonline.com
My name is Hank Daniecki and I am the new Director of Engineering at SLP Performance Parts. I am intimately familiar with ALL SLP parts as I have worked for SLP as an engineer for the last 6 years. SLP's engineering department will be taking a much more active role on LS1Tech and many other boards on the web to help clear up any issues or problems that anyone might have with any and all SLP products. There are many rumors and false claims being made that we want to clear up as soon as they are spotted on LS1 tech. The SLP Engineering Department loves input from customers and the challenge to make our customers as happy as humanly possible. We take our jobs very seriously. We do not like to see members bash our products that we spend long days and nights designing without solid ground to stand on. The SLP Engineering Department and I welcome with open arms constructive criticism and factual replies. I will make sure all questions are answered with great detail. Any and all on the board, please do not hesitate to email me with any issues or problems you might have. Please include in your email a phone number so that we can communicate by phone if needed. I look forward to getting SLP a better reputation on this board. Our products are top notch and we take the greatest pride in the work that we do. Please take the time to check out our website and our new 100pg catalog; I am sure you will agree our products are top notch. Also, we have re-opened the SLP Installation and Dyno Center. Please find the link below.
http://www.slponline.com/20061006_install_dyno.asp
Thank You.
Hank
__________________
Hank Daniecki
Director of Engineering
SLP Performance Parts
www.SLPonline.com
Last edited by The Professor; 12-06-2006 at 05:40 PM.
#17
TECH Addict
iTrader: (2)
Didn't expect that for sure
Any way, to the OP
lid, any will do tho I do like my SLP
cat back your choice of what sound level you want
headers pacesetter for the lower budget, kooks for the higher budget
SFCs I have the UMI 3 point work fine
Stall and trans cooler
Dyno tune
Then the only limit is your wallet and your imagination
Any way, to the OP
lid, any will do tho I do like my SLP
cat back your choice of what sound level you want
headers pacesetter for the lower budget, kooks for the higher budget
SFCs I have the UMI 3 point work fine
Stall and trans cooler
Dyno tune
Then the only limit is your wallet and your imagination
#20
TECH Fanatic
iTrader: (6)
Originally Posted by SLPPower
landstuhltaylorand fellow LS1Tech users...
as for the loudmouth, i should have added an imo. it is way too raspy for my tastes, and only gets worse with lts and no cats. i dont have experience on many of your other products, but i will give you credit for the factory cars.
im looking forward to the customer service now available.