Ms4
#1
Ms4
Well i have 98 trans am. Ive got the longtubes.exhaust and a hp tune and im thinking about goin with a cam, mainly the ms4. But my car is an auto thus being the problem. I dont want to put a stall in my car. Need some help on deciding if this cam is to big for me sense im not going to do a stall.
#6
TECH Addict
iTrader: (19)
Join Date: Mar 2006
Location: Owings, Md
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
the ms4 is really too big for most people for daily driving. Ive heard of a few people going back to something smaller. Dont just go for the biggest thing youve heard of. there are plenty of smaller cams that will make almost the same horsepower and also be much better mannered
Trending Topics
#8
On The Tree
Join Date: Jan 2005
Location: Hubert, NC
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
yup. I agree. MS4 is to big for an auto,unstalled and used as a DD. There are some great smaller cams w/ better road manners, such as the TR224 or the TSP 228R. These will give you good numbers and driveability. good luck.
#9
Launching!
Join Date: Mar 2007
Location: lynchburg, VA
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
i am a huge fan of the MS4. i am going with it for sure when the time comes. the power gains from the MS4 are awsome and i have found that it is a very streetable cam with a good tune. 2 good friends have them in there DD and get 22+ MPG with no street issues! all that said it is not a cam you would want to run without a stall or a set of gears!if you are trying to stay away from the stall becouse of your friends bad experience i would tell you not to wory everyone has problems with somthing at some point. but putting a stall in your car will help out ALOT as well as allowing you to run the cam you want. just do some searches and find the right stall for your app so you dont have any problems!
#10
12 Second Club
iTrader: (2)
Join Date: Sep 2006
Location: Grande Prairie, AB. That's Canada you hoser.
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
With a stall alone I lot 1/2 a second off my stock times.
I also lost another 1/2 a second with drag radials.. something about hitting 60mph in 2nd just after the 60' mark didn't seem right...
That and the 100 feet of rubber and the pillowing white cloud eminating from the back of my car off the line told me it was time as well.
I also lost another 1/2 a second with drag radials.. something about hitting 60mph in 2nd just after the 60' mark didn't seem right...
That and the 100 feet of rubber and the pillowing white cloud eminating from the back of my car off the line told me it was time as well.
#13
Launching!
Join Date: Mar 2007
Location: lynchburg, VA
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
when you know what you are getting in to a big cam is AWSOME!! but its just that you have to know what you are getting in to. dont expect your car to behave like it did from the factory. there is going to be both ups and downs to any cam the bigger you go the more dramatic the changes and drawbacks get. altho when you are looking for FAST i have to go with the big cam i know there are ALOT of fast small cam cars out there but when it boils down to it the FASTEST n/a daily driver cam ONLY car right now is powered by a T-REX i think it is running low 10s and drives it to work every day! i just havnt seen that much performance from a small cam car yet. altho i am sure they require much less upkeep and attention to run properly
#16
TECH Addict
iTrader: (6)
As long as you get a reputable stall and at minimum a tranny cooler your A4 should last a fairly long time depending how much you beat on it. Honestly the best mod you can do for an A4 is a stall, some taller gears, and a decent tire. Night and day difference over the stocker. If you want to stay stock stall then you going to be limited to max a 224tr IMO.
#17
TECH Enthusiast
iTrader: (26)
Join Date: Jan 2006
Location: Western Section
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Worst post of the day? Someone delete this thread. You're king of the "jump on the badwangon" people today just so you know. People you knew had problems with a stall so you don't want one, that's incredibly uneducated. You want an MS4 cause it's one of the biggest and baddest mianstream cams out. Do some research and get a stall becfore you even dream of getting a cam. 1) you'll gain more in the 1/4 than you will with a cam 2) trying to cam a car at all without a stall is stupid. <------------- that's a period
#18
Also keep in mind that the MS4 is so big that chances are your piston to valve clearance will be too small and you will have to fly cut your pistons. So that simple stick a cam in and tune (without even a converter) just became a pull the cylinder heads off and cut relieves in the top of your flat top stock pistons. Not worth it in my opinion. Go with a smaller cam, stall it and tune it. And if you have the money, might as well do heads to it as well to help the engine breath to a maximum.
#19
Launching!
Join Date: Mar 2007
Location: lynchburg, VA
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sidewayz28
stop feeding this guy BS.. he wants a stock STALL, meaning a TINY *** CAM.. nothing even on the same boat as a MS4... yeah thats great big cams produce big numbers, but they arent THE MOST friendly DD cars..
oh hawaiianpunch.. what cam are u running?
oh hawaiianpunch.. what cam are u running?
#20
On The Tree
Join Date: Jan 2005
Location: Hubert, NC
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
the MS4 will clear piston to valve clearance w/ out having to flycut, that is one of the main selling points to that cam.
people who think cams like the MS4 and MS3 are the end all be all of cam are just people stuck on the dyno numbers game. I have seen to many cars produce #'s on the dyno and turn around and run like crap at the track and on the street and get beat up by smaller cammed cars. Just remember...numbers are just numbers man, they don't mean ****. Go look into the cam only #'s and there are plenty of people running better stats on smaller cams than an MS4.
If you want to keep your gas mileage and A4 drivability, just do full bolt-ons and some good DR's, gears and a tune. You should be low 12's, that is potent enough for a DD imo.
people who think cams like the MS4 and MS3 are the end all be all of cam are just people stuck on the dyno numbers game. I have seen to many cars produce #'s on the dyno and turn around and run like crap at the track and on the street and get beat up by smaller cammed cars. Just remember...numbers are just numbers man, they don't mean ****. Go look into the cam only #'s and there are plenty of people running better stats on smaller cams than an MS4.
If you want to keep your gas mileage and A4 drivability, just do full bolt-ons and some good DR's, gears and a tune. You should be low 12's, that is potent enough for a DD imo.