"NEW ORLEANS greasy talk part 2" da remix
09-28-2009, 11:10 PM
#1741
TECH Regular
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: louisiana
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
how many u gave him. thats a 12.2 car or better. he has the fastest stock g8 check around.look around this site ask other people with those cars run stock and they will tell you they run high 12's or 13's. His is just a special one like every car over there bo. well better luck next time.
its all in the tuning!!
i wonder if i could get my grand prix to run some 13.0's or 12.90's with a good good tune...
09-28-2009, 11:31 PM
#1742
Shifting Hey a good rule of thumb is that if the cam calls for you to shift at 6500 shift at 6000 always 500 before the shift point. The man I shift by sound thing is out with LS motors until you really know our car. It is eaiser to just glance at the tach on the dash or if there is a shift light do it. I heard you say that you didn't know if the light was dialed in set it low raise the rpms and watch when it comes on. That will get you pretty close, then you need to go somewhere they can put the laptop on it and be sure the dash tach is close to what the computer is actually reading. Remember you are shifting 500 rpm early because the motor is on its way up and will usually the reciprocating weight will carry it another 500 to 700 depending on the tranny or manual the shifter. ALL IN ALL YA CAR LOOKS REAL GOOD, STAY AT IT
09-28-2009, 11:56 PM
#1745
09-29-2009, 01:31 AM
#1746
Staging Lane
Join Date: Sep 2009
Location: brick jungle
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
say hot yall got fake out with da cars but still got action on da street i bet u shifing early on dem hieks i bet u ANT miss NO gearS u and crazy k. DA NEW NOS HIEKS ITS COLD LOL LOL
Last edited by big sho; 09-29-2009 at 01:40 AM.
09-29-2009, 08:44 AM
#1747
Teching In
Join Date: Sep 2009
Location: New Orleans
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hey hey hey, I need help!
I have a 98 camaro Z28 with the exhaust cut off and I need to run the pipes to the back.
I want to get the rear bumper that has the pre cut rectangle exhaust in the middle.
Does anyone know where to find it?
I have a 98 camaro Z28 with the exhaust cut off and I need to run the pipes to the back.
I want to get the rear bumper that has the pre cut rectangle exhaust in the middle.
Does anyone know where to find it?
09-29-2009, 10:15 AM
#1748
TECH Regular
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: louisiana
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
go to the parts classifieds and somebody in there might have a centermount valance bumper for sale...or do a search there was somebody on here clonning the cme valance and selling them...
09-29-2009, 12:22 PM
#1749
TECH Regular
iTrader: (5)
Join Date: Jan 2007
Location: New Orleans, La.
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
how many u gave him. thats a 12.2 car or better. he has the fastest stock g8 check around.look around this site ask other people with those cars run stock and they will tell you they run high 12's or 13's. His is just a special one like every car over there bo. well better luck next time.
Here we go again. 
Eastbank Stock = The way it came from the factory/dealership.
Westbank (Pete and Co.) Stock = Everything you can throw at it, except Kenneth shelf cam/head/nitrous package.
09-29-2009, 01:02 PM
#1752
we all know just a few and who that few really is, ITS ONLY 1 Bigole person with a so call claim he has a vette who rep pewter **** and every end of a sentence he says BO who had a convertable with a cam and spray shifting gears with vice grips that ran 12.5 which he thought was real fast, and only had one real fast car that he blew up because of technical difficulties of his windows fogging up, and this person bench presses about 275lbs weighing in at about 6'2 255 what a record of 1-15 and came out of retirement 3 times to get knocked back out. AND HIS NAME IS ???????????????????????
Last edited by Travose21; 09-29-2009 at 01:10 PM.
09-29-2009, 01:12 PM
#1754
TECH Regular
iTrader: (5)
Join Date: Jan 2007
Location: New Orleans, La.
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
its a g9 not a g8...thats one hell of a tune on dat thing....lol i never seen a stock g9 run 12's bo... im always on youtube..especially low 12's lol...congrats on da winits all in the tuning!!i wonder if i could get my grand prix to run some 13.0's or 12.90's with a good good tune...
its all in the tuning!!i wonder if i could get my grand prix to run some 13.0's or 12.90's with a good good tune...
As for the Grand Prix, it's not on my list of supported vehicles, but I can holla at Vince and see if he can take care of that for you. Just let me know.
09-29-2009, 01:14 PM
#1755
TECH Regular
iTrader: (5)
Join Date: Jan 2007
Location: New Orleans, La.
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
we all know just a few and who that few really is, ITS ONLY 1 Bigole person with a so call claim he has a vette who rep pewter **** and every end of a sentence he says BO who had a convertable with a cam and spray shifting gears with vice grips that ran 12.5 which he thought was real fast, and only had one real fast car that he blew up because of technical difficulties of his windows fogging up, and this person bench presses about 275lbs weighing in at about 6'2 255 what a record of 1-15 and came out of retirement 3 times to get knocked back out. AND HIS NAME IS ???????????????????????
. Autozone Slimm might know.
09-29-2009, 02:13 PM
#1758
TECH Regular
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: louisiana
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
) <<<--under dat boy hood too clean..lol..its life just do u.....
09-29-2009, 03:17 PM
#1760
On The Tree
Join Date: Jul 2009
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
